Second Hand Nissan Cabstar Wheel Hub

The Nissan Cabstar sold in the UK went through distinct generations, and running gear including wheel hubs typically changed at those generational boundaries, so a hub from a different generation is unlikely to be a straight swap. Within the same generation the payload and GVW rating of the donor vehicle should match yours, as heavier-rated trucks often carry larger brake and hub assemblies. Always confirm the exact cross-reference with the breaker using both registrations before purchasing.

Engine size can influence the brake and hub specification on the Cabstar, as higher-powered variants with greater GVW ratings are sometimes fitted with uprated running gear. A hub from a 2.5-litre truck may not share the same bolt pattern, bearing seat, or brake mating face as one from a 3.0-litre variant. Check the GVW plate on both vehicles and confirm the exact spec with the breaker before ordering.

Yes, payload and GVW rating genuinely matter on the Cabstar because heavier-rated variants can use different axle and hub assemblies to cope with the additional load. Do not rely on the model name alone — check the manufacturer's plate in the cab for the actual GVW figure. Give that figure to the breaker alongside your registration so they can match the correct hub.

For a front wheel hub this can matter depending on how the steering and braking components are integrated, so always specify nearside (NS, left as you sit in the cab) or offside (OS, right as you sit in the cab) when contacting a breaker. Rear hubs on a straight axle are often symmetrical, but confirm this with the breaker against your specific vehicle rather than assuming.

Trim level and cosmetic specification do not affect wheel hub fitment on the Cabstar — what matters is the generation, the engine size, and most importantly the GVW or payload rating. You may find cosmetic differences on a part pulled from a different spec vehicle, but these are irrelevant for a hub. Stick to matching generation and weight rating, and verify with the breaker using your registration.

Year does matter on the Cabstar because running gear specifications changed between generations and could also vary within a generation based on GVW rating and engine fitment. Give your exact registration and your vehicle's GVW plate reading to the breaker rather than just the model year, as a truck from a similar period but different weight class may not share the same hub. The breaker can cross-reference the part number to confirm a safe match.