Cheap Nissan Cabstar Tyre

The Cabstar has gone through distinct generations, and tyre fitment depends on the wheel size and bolt pattern specified for each generation rather than the tyre itself being model-specific — tyres are a standard commodity part sized to the rim. What you need to confirm is the correct tyre size (width, profile, and rim diameter) marked on your existing tyres or in your handbook, and that any used wheel you buy matches your hub's PCD and offset. Confirm the exact size with the breaker against your registration before ordering.

Yes, this is an important one — the Cabstar is a light commercial vehicle available in different GVW ratings, and heavier payload variants can be fitted with tyres of a higher load index to handle the greater weight. The tyre size and load rating stamped on your current tyres, or on the vehicle plate inside the door or cab, is the safest reference point. Check the plate on your specific vehicle rather than relying on the model name alone, and confirm the load index with the breaker.

Engine size does not directly determine tyre size on the Cabstar — it is the axle weight rating and GVW classification that governs the tyre specification. A higher-output engine variant may coincide with a heavier-duty chassis setup, but the tyre size to look for is always the one stamped on your existing tyres or listed on the vehicle identification plate. Quote that size to the breaker rather than just the engine code.

Tyres themselves are not side-specific — the same tyre size fits either side of the axle on a standard Cabstar. However, if you are buying a tyre already mounted on a wheel, confirm the wheel's offset and that it matches your vehicle's fitment, as a mismatch could affect clearance. For a tyre alone, the size and load rating are all that matter.

Yes — some Cabstar variants were fitted with twin rear wheels (duallies), which use a different tyre size and profile from single rear wheel configurations, and the wheels themselves are not interchangeable between the two setups. You must confirm whether your vehicle has single or twin rear axle fitment before sourcing a used tyre or wheel from a breaker. Check the rear axle on your own vehicle and quote the exact tyre size to the breaker against your registration.

Trim level does not affect tyre fitment on the Cabstar — the relevant factors are GVW rating, axle load specification, and the rim size fitted to your vehicle, none of which are determined by trim designation. The tyre size printed on your existing tyres or on the door/cab plate is the definitive guide regardless of what trim your vehicle is badged as. Quote that size directly to the breaker and they will match it accordingly.