Cheap Hyundai Tucson Alloy Wheels
Get quotes for a used or replacement Hyundai Tucson alloy wheels. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Hyundai Tucson alloy wheels
A used alloy wheels that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State the wheel size
- State if you need a single wheel or full set
Other used Hyundai Tucson parts
- Used Hyundai Tucson Heater Motor
- Used Hyundai Tucson Battery
- Used Hyundai Tucson Central Locking Motor
- Used Hyundai Tucson Wiper Motor
- Used Hyundai Tucson Rear Bumper
- Used Hyundai Tucson Roof Panel
- Used Hyundai Tucson Coil Pack
- Used Hyundai Tucson Bulkhead
- Used Hyundai Tucson Fuel Injection Pump
- Used Hyundai Tucson Differential
- Used Hyundai Tucson Airbag
- Used Hyundai Tucson Seat Belt
Used alloy wheels for other Hyundai models
Fitment questions
Will alloy wheels from a 2016 Hyundai Tucson fit a 2019 Hyundai Tucson?
The third-generation Tucson (Mk3) ran from 2015 to 2021, with a facelift in 2018, so a 2016 and a 2019 are both within the same generation but either side of that facelift boundary — the PCD and centre bore are the same across the Mk3, but whether the pre-facelift and post-facelift wheels share the exact same offset and bolt pattern in practice is worth confirming with the breaker against your registration before you buy.
Does a Hyundai Tucson Mk2 alloy wheel fit a Mk3 Tucson?
The second-generation Tucson (Mk2) ran from 2009 to 2015 and the third generation (Mk3) from 2015 to 2021 — these are distinct generations and the PCD, offset, and centre bore can differ between them, so fitting a Mk2 wheel to a Mk3 is not a straightforward swap. Confirm the exact PCD, offset, and centre bore of both vehicles with the breaker against your registration before proceeding.
Do alloy wheels from a higher trim like Tucson Premium or Ultimate fit a base SE trim Tucson?
Trim level does not affect alloy wheel fitment on the Tucson — what matters is that the PCD, offset, and centre bore match, not whether the wheel came from an SE, Premium, or Ultimate car. That said, higher trims often had larger diameter wheels, so you may end up with a different look or need to check your tyre sizing; the breaker can advise on the spec of the wheels they have.
What PCD do Hyundai Tucson alloy wheels use?
Hyundai Tucson alloy wheels across the Mk3 generation (2015–2021) typically use a 5x114.3 PCD, which is common across many Hyundai and Kia models of that era and means there can be good availability from breakers. Always confirm the PCD, offset, and centre bore against your specific registration with the breaker, as specifications can vary.
Will Hyundai Tucson wheels fit a Kia Sportage?
The Tucson and Sportage share the same platform and typically share the same 5x114.3 PCD across their equivalent generations, meaning alloy wheels can often interchange — the Mk3 Tucson (2015–2021) and the corresponding Sportage generation are a commonly cited match. However, offset and centre bore should still be confirmed with the breaker against both registrations before buying, as subtle differences exist.
Does it matter whether my Tucson has TPMS when buying used alloys?
If your Tucson is fitted with a tyre pressure monitoring system (TPMS), the sensors are typically housed in the wheel and compatibility with replacement sensors is not something we can confirm here — this depends on the sensor type and whether it can be programmed to your car. Raise this directly with the breaker, who can advise on whether TPMS sensors are included and whether they are likely to be compatible with your vehicle.