Used Hyundai Tucson Roof Panel

The Tucson has run across three clear generations in the UK: the first generation (JM platform) ran from 2004 to 2010, the second generation (LM platform) from 2010 to 2015, and the third generation (TL platform) from 2015 to 2021, with a facelift in 2018. The roof panel is platform-specific, so a panel from the wrong generation will not fit regardless of anything else. Always match to your generation first, and confirm the exact platform with your breaker against your registration.

The 2017 and 2019 Tucson both sit within the third-generation TL platform (2015–2021), with the facelift arriving in 2018. Because the roof panel is a structural body pressing rather than a styled front or rear component, it is generally unaffected by the facelift changes, which focused on the front end, tail lights, and interior. That said, mid-generation pressing changes can occasionally occur without being widely publicised, so confirm panel-to-panel compatibility with the breaker using both registration numbers before committing.

Trim level does not affect roof panel fitment on the Tucson — S, SE, Premium, Sport, and SR+ all share the same body pressing within a given generation. You may find that a sunroof-equipped donor car leaves a different aperture cut into the roof compared with a solid-roof car, so make sure you match solid-roof to solid-roof (or panoramic to panoramic) rather than worrying about trim badges. Your breaker can confirm the donor car's roof specification from its registration.

No — the first generation (JM, 2004–2010) and second generation (LM, 2010–2015) are entirely different platforms with different body shells, so the roof panel dimensions and attachment points will not correspond. You must source a panel from within the correct generation for your car. Confirm the platform with your breaker against your registration to be sure.

Yes, this is one of the most important things to check — a roof pressing cut for a panoramic glass panel has a significantly larger aperture than a solid roof, and the two are not interchangeable. Always tell the breaker whether your car has a standard roof or a panoramic sunroof so they can match the correct pressing from the donor vehicle. Engine choice and trim level make no difference here, but the sunroof aperture absolutely does.

Both 2015 and 2016 Tucsons sit within the third-generation TL platform (2015–2021), so in principle the roof panel pressing is the same. The Tucson is a five-door SUV throughout this generation with no body-style variation to worry about, so generation and sunroof specification are the only real variables. Confirm both registration numbers with your breaker before purchase, as early and later build-year cars can occasionally carry minor production differences.