Findapart

Škoda Yeti Exhaust Manifold Replacement Parts

Compare prices on a used Škoda Yeti exhaust manifold from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Yeti exhaust manifold

A used exhaust manifold that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Yeti parts

Used exhaust manifold for other Škoda models

Fitment questions

Does the Škoda Yeti actually have an exhaust manifold, or is it part of the turbo assembly?

All Škoda Yeti engines — both petrol and diesel — are turbocharged, so technically the exhaust manifold is integrated into or sits directly upstream of the turbocharger rather than being a traditional standalone cast-iron manifold feeding a naturally aspirated system. On most Yeti engines the manifold and turbo are closely coupled, and on several variants (particularly the 1.2 TSI and 1.4 TSI petrols) the manifold is cast integrally into the cylinder head or the turbo housing itself. When searching for this part, you may actually need a turbocharger assembly, a turbo inlet manifold, or a cylinder head with integrated manifold depending on your specific engine — confirm exactly which component has failed with a mechanic before ordering from a breaker.

Which engine code do I need to match when buying a used Yeti exhaust manifold or turbo manifold from a breaker?

Engine code is the most important thing to match on any Yeti exhaust or manifold component — even engines of the same size and fuel type can have different turbo and manifold configurations depending on the code. Common Yeti engines include the 1.2 TSI (CBZB, CBZA), 1.4 TSI (CAVE, CTHD), 2.0 TDI (CFHC, CFJA, CLJA), and 1.6 TDI (CAYC, CXMA), among others, and the manifold architecture differs between these. Give your engine code — found on your V5C or stamped on the engine block — to the breaker so they can pull the correct part rather than relying on engine size alone.

Will an exhaust manifold or turbo manifold from a pre-facelift Yeti (2009–2013) fit the facelifted model (2014–2017)?

The Yeti was facelifted in 2013–2014, but the key fitment question is whether the engine code changed between the two cars, not simply whether one is pre-facelift or post-facelift. Some engine codes carried across the facelift largely unchanged, meaning the turbo and manifold assembly may be compatible, while others were updated to meet tightening emissions requirements (Euro 5 to Euro 6), which can affect the manifold, turbo, and DPF configuration. Name the generation boundary to the breaker and ask them to cross-reference both engine codes — never assume a visual match across the 2013–2014 boundary is a fitment match.

Does the trim level matter — will a manifold from an Elegance or Ambition fit my S or SE Yeti?

Trim level — whether your Yeti is an S, SE, Elegance, Ambition, L&K, or Outdoor — has no effect on exhaust manifold or turbo manifold fitment whatsoever. The manifold is determined entirely by the engine code, fuel type, and emissions standard, all of which are shared across trim levels where the same engine is offered. You can safely ignore trim when searching, but do still confirm the engine code matches exactly with the breaker.

Does it matter whether my Yeti is 2WD or 4WD (4x4) when buying an exhaust manifold?

The drivetrain layout — front-wheel drive versus the Yeti's 4x4 variants — does not affect the exhaust manifold or turbo manifold, as these are engine-side components entirely upstream of the drivetrain. The same engine code was available in both 2WD and 4WD configurations, and the manifold assembly is identical between them. Match on engine code and emissions era, and disregard whether the donor vehicle was 4WD or not.

Could using an exhaust manifold or turbo assembly from the wrong emissions era cause an MOT failure on my Yeti?

Yes, fitting components from the wrong emissions era is a real risk on the Yeti, particularly where Euro 5 and Euro 6 engine variants share similar external appearances but have different catalytic converter and DPF integration. A manifold or turbo assembly from an earlier emissions era may not support the correct catalyst configuration for your vehicle's type approval, which could result in a failed emissions test at MOT. The specifics of how catalytic converters and DPFs interchange across emissions boundaries is strong confirm-with-the-breaker territory — always tell the breaker your registration so they can verify the emissions standard of the donor vehicle against yours.