Get quotes for a used or replacement Škoda Yeti dpf. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two dpfs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Yeti ran from 2009 to 2017, with a facelift in 2013, and the key fitment question is whether both cars share the same engine code and emissions standard — Euro 5 and Euro 6 units are not straightforwardly interchangeable. If you are crossing the pre-facelift to post-facelift boundary (pre-2013 versus 2013-onwards), confirm with the breaker against both registrations before ordering, as the exhaust system may differ even if the engines look similar on paper. Never assume a DPF will fit based on year alone.
A 2012 Yeti sits in the pre-facelift generation (2009–2013) while a 2015 sits in the facelifted generation (2013–2017), and these may also fall under different emissions standards, which directly affects DPF specification. Whether a part crosses that 2013 boundary and still fits is strong confirm-with-breaker territory — give the breaker both registration numbers so they can check engine codes and emissions ratings. Fitting a DPF from the wrong emissions era could also cause MOT issues.
Trim level does not affect DPF fitment — the part follows the engine code and emissions standard, not whether the car is an S, SE, Elegance, or Outdoor. You may find minor cosmetic differences in surrounding heat shields or fixings between cars that have lived different lives, but the DPF itself is determined by what is under the bonnet. Confirm the engine code with your breaker to make sure the unit matches.
The engine code is the single most important piece of information for matching a Yeti DPF, as even within the same displacement — for example the common 2.0 TDI — different codes can have different exhaust and emissions configurations. You will find the engine code on your V5C, on a sticker under the bonnet, or stamped on the engine block itself. Pass this code to the breaker alongside your registration so they can verify the part is from a compatible vehicle.
No — DPFs are diesel-specific components, and a petrol Yeti does not have one at all; the petrol variants use a catalytic converter rather than a DPF. Make sure you and the breaker are both clear that you are sourcing a diesel unit matched to your exact engine code. Mixing up diesel and petrol exhaust aftertreatment components is not a fitment option.
In principle, a DPF from a European-market Yeti with the same engine code and emissions standard could be compatible, but Euro 5 and Euro 6 boundaries are the critical check — a unit from an earlier-registered vehicle in another market may not meet the standard your car was type-approved to. Confirm with the breaker that the donor vehicle's registration and engine code align with yours before purchasing. A mismatched emissions-era DPF could cause failure at MOT.