Findapart

Used Škoda Yeti EGR Valve

Get quotes for a used or replacement Škoda Yeti egr valve. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Yeti egr valve

No two egr valves are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Yeti parts

Used egr valve for other Škoda models

Fitment questions

Does the Škoda Yeti actually have an EGR valve?

Yes, but only on diesel-engined Yetis — the EGR (exhaust gas recirculation) valve is a standard component on the diesel variants, which used 1.6 TDI and 2.0 TDI engines throughout the Yeti's production run from 2009 to 2017. Petrol-engined Yetis (1.2 TSI and 1.4 TSI) do not have an EGR valve in the same sense, so if you have a petrol Yeti and are chasing an emissions or running fault, confirm with your mechanic exactly which component you need before searching. If you have a diesel, read on — engine code is the key fitment factor.

Will a Škoda Yeti EGR valve from a pre-facelift (2009–2013) fit a facelift model (2013–2017)?

The Yeti received a significant facelift in 2013, and while some diesel engine codes carried across that boundary, emissions calibration and ancillary components can differ between the two generations, so a pre-facelift EGR valve is not a guaranteed swap onto a facelift car even if the engine displacement looks the same. The safest approach is to match by engine code — found on your V5C or via a check with the breaker against your registration — rather than by year alone. Always confirm with the breaker that the part number or engine code matches yours before purchasing.

Does it matter whether my Yeti is 2WD or 4WD (4x4) when buying a used EGR valve?

No — the EGR valve is part of the engine and exhaust gas circuit, so drivetrain layout (front-wheel drive versus 4WD) has no bearing on which EGR valve you need. What matters is your engine code and emissions standard (Euro 5 or Euro 6), not whether your Yeti has a Haldex rear axle. Focus your search on matching the engine code and confirm with the breaker against your registration.

Does the trim level — S, SE, Elegance, or Outdoor — affect which EGR valve I need?

No, trim level makes no difference to EGR valve fitment on the Yeti — an SE and an Elegance with the same engine code will use the same valve. The Yeti's trim grades (S, SE, Elegance, Outdoor, and later Black Edition) affect interior specification and exterior features, none of which touch the engine's emissions hardware. Match by engine code and emissions era, and don't pay extra or less based on the trim the donor car came from.

Does the engine code really matter, or is the 2.0 TDI EGR valve all the same?

Engine code genuinely matters — Volkswagen Group fitted several variants of the 2.0 TDI to the Yeti (including CFHC, CFJA, CLCA, and others across the production years), and these can have different EGR valve designs, actuator types, and pipe connections. A valve that looks visually similar from another 2.0 TDI may not seal correctly or may trigger fault codes if it is from a different code or emissions generation. Always give the breaker your full engine code — stamped on the engine block and listed on your V5C — so they can confirm the part is a proper match.

Can I use a Yeti EGR valve from another VAG group car, like a Golf or Octavia?

It is possible that some VAG group vehicles sharing the same engine code use an identical EGR valve, but this is not something to assume without verification — fitment can vary due to differences in pipework routing, coolant-cooled versus non-cooled designs, and Euro 5 versus Euro 6 calibration even within the same engine family. Give the breaker both your Yeti's registration and the engine code from the potential donor vehicle and ask them to cross-reference before you commit. Never assume a part fits based on engine displacement alone.