Need a used Škoda Fabia exhaust manifold? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used exhaust manifolds vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
All petrol Škoda Fabias use a separate exhaust manifold bolted to the cylinder head, so yes, it exists as a distinct replaceable part. Diesel Fabias also have an exhaust manifold, though on some turbocharged diesel variants it is integrated closely with the turbocharger housing, making it a more complex replacement. Either way, the manifold is a real, sourced part on this model across all generations.
Almost certainly not as a straight swap — the Mk1 (1999–2007) and Mk2 (2007–2014) Fabias use different engine families and mounting configurations, even where engine sizes look similar on paper. Although some VAG group engines carried across generations, the manifold flanges, stud patterns and sensor positions often differ. Name the boundary — Mk1 to Mk2 — to your breaker and ask them to cross-reference against your exact engine code before buying.
Trim level makes no difference to exhaust manifold fitment on the Fabia; what matters is your engine code, fuel type (petrol or diesel), and the emissions era the car was built to. A manifold from a basic Classic and one from an Elegance with identical engine codes are interchangeable. The vRS is worth noting separately — it uses higher-output turbocharged engines (such as the 1.4 TSI or earlier 1.2 TSI depending on generation), so confirm the specific engine code rather than relying on the vRS badge alone.
The Mk3 Fabia launched in 2015 and brought a significantly updated engine lineup, largely moving to the EA211 family, which differs from the units commonly found in the Mk2 (2007–2014). Even where displacement looks the same — for instance a 1.0 or 1.2 petrol — the manifold design, mounting points and emissions equipment differ across this generation boundary. Stick to Mk2-sourced parts matched by engine code, and confirm with the breaker before purchasing.
For the manifold itself the direct impact is usually limited, but the emissions era matters because manifolds from Euro 6 engines (broadly from 2015 onwards on the Mk3) may have different sensor ports, lambda boss positions or catalyst proximity designs compared with Euro 5 units. Fitting the wrong era manifold could cause sensor faults or MOT issues. Confirm with the breaker that the donor car's registration and engine code match your own emissions standard — anything touching the catalyst or DPF side of the system especially needs that verification.
No — the 1.2 petrol engine in the Fabia went through distinct generations, including the older three-cylinder 1.2 (HJO, AWY, BME codes) in the Mk1, and later the 1.2 TSI turbocharged units (such as CBZB) in the Mk2 and Mk3. These have fundamentally different manifold designs, and a naturally aspirated 1.2 manifold will not fit a turbocharged 1.2 because the turbo version's manifold incorporates the turbocharger mounting. Always give the breaker your full engine code — not just the engine size — to ensure you get the right part.