Findapart

Used Škoda Yeti Oxygen Sensor

Need a used Škoda Yeti oxygen sensor? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Yeti oxygen sensor: what matters

Fitment on a used oxygen sensor varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Yeti parts

Used oxygen sensor for other Škoda models

Fitment questions

Does the Škoda Yeti actually have an oxygen sensor?

Yes, but only on petrol-engined Yetis — oxygen (lambda) sensors are part of the closed-loop fuelling system that petrol engines rely on. Diesel Yetis do not use oxygen sensors in the same way; if you have a diesel and are chasing an exhaust or emissions fault, the part you are most likely looking for is a NOx sensor, exhaust gas temperature sensor, or a component related to the DPF system. Check your fuel type before ordering anything.

Will an oxygen sensor from an early Škoda Yeti (2009–2013) fit a facelifted Yeti (2013–2017)?

The Yeti ran from 2009 to 2017, with a facelift arriving in 2013 that brought updated engines and emissions calibrations alongside the styling changes. Even where an engine code carried across that 2013 boundary, the sensor specification can differ because of revised exhaust mapping and emissions tuning, so you should not assume pre-facelift and post-facelift sensors are interchangeable. Name the engine code and your registration to the breaker and ask them to confirm against their donor vehicle before buying.

Does the trim level affect which oxygen sensor I need — for example, does it matter if my Yeti is an S, SE, Elegance, or Laurin & Klement?

Trim level makes no difference to oxygen sensor fitment on the Yeti — the sensor is determined entirely by the engine code and model year, not by whether you have a base S or a top-spec Laurin & Klement. The one thing to be aware of when buying from a breaker is that a higher-trim donor car may have additional heat shielding around the exhaust, but the sensor itself will be the same part. Confirm the engine code matches and the trim difference can be ignored.

Does the engine code really matter, or will any petrol Yeti sensor do?

Engine code matters a great deal — the Yeti was offered with several different petrol units across its life, including 1.2 TSI and 1.4 TSI variants carrying different codes, and each can have a different number of sensors, different thread specifications, and different connector types. Fitting a sensor from the wrong engine code risks a persistent fault code, poor fuelling, or an MOT emissions failure. Always match the engine code shown on your V5C or visible on the engine block, and give that code to the breaker rather than going by engine size alone.

I have a Euro 5 Yeti — can I use an oxygen sensor from a Euro 6 car?

The Yeti's production life means the vast majority of UK examples fall under Euro 5 emissions regulations, with later 2016–2017 cars moving to Euro 6; exhaust system components including lambda sensors are calibrated to the emissions standard of their era. A Euro 6 sensor may have a different output characteristic or connector to suit revised engine management software, so cross-era substitution is not straightforward. Tell the breaker your registration and engine code and ask them to confirm the donor vehicle's emissions standard matches yours before proceeding.

How many oxygen sensors does a petrol Škoda Yeti have, and does it matter which one I'm replacing?

A typical petrol Yeti will have at least two oxygen sensors — one upstream of the catalytic converter (the pre-cat or front sensor) and one downstream (the post-cat or rear sensor) — though the exact count can vary by engine code and model year. The two positions have different roles and are not interchangeable with each other, so you need to know whether you are replacing the upstream or downstream sensor before approaching a breaker. Your fault code or a diagnostic report will usually tell you which sensor has failed, and you should pass that information to the breaker along with your engine code and registration.