Need a used Škoda Rapid exhaust manifold? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used exhaust manifolds vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Yes, all petrol and diesel engine variants of the Škoda Rapid (2012–2019) have an exhaust manifold — it is the cast metal component that collects exhaust gases from each cylinder and routes them into the main exhaust system. On turbocharged variants the manifold is often integrated with, or sits immediately upstream of, the turbocharger, so the two are closely related parts. If your Rapid is turbocharged, make sure you and the breaker are clear on whether you need the manifold alone or the manifold-and-turbo assembly.
The Škoda Rapid ran from 2012 to 2019, with a facelift arriving for the 2016 model year. Within the same engine code — for example 1.2 TSI CBZB or 1.6 TDI CAYC — the manifold design is often shared across that facelift boundary, because VAG Group typically carries engine families across mid-life updates unchanged. However, whether a specific used manifold from a pre-facelift car will bolt straight onto a post-facelift example with the same engine code is something you should confirm with the breaker against your exact registration, as minor casting or gasket-face revisions can occur.
Engine code is the single most important thing to match for an exhaust manifold — even within the same fuel type, different engines use different cylinder spacings, port shapes, and stud patterns, so a manifold from a 1.2 TSI will not fit a 1.4 TSI or a 1.6 TDI. Always give the breaker your full engine code (found on your V5C or stamped on the engine block) rather than just the displacement. Fitting a manifold with the wrong port layout risks exhaust leaks, failed MOT emissions tests, and potential damage to surrounding components.
Yes, emissions standard can affect manifold specification because Euro 6 calibration sometimes requires revised exhaust gas routing or changed catalyst positioning that starts at the manifold. The Škoda Rapid is generally considered a Euro 5 model throughout most of its UK life, but later 2018–2019 examples with certain engines may carry Euro 6 certification — check your V5C or the DVLA record for your registration. Tell the breaker your emissions standard alongside your engine code so they can supply a manifold from a comparable-spec donor car rather than one from a different regulatory era.
No — trim level (S, SE, Elegance, Colour Edition, Monte Carlo and so on) has no bearing on exhaust manifold fitment whatsoever, as the manifold is determined entirely by the engine fitted, not the specification of the interior or exterior. A Monte Carlo and a base S with the same engine code and same emissions era use an identical manifold. The only cosmetic difference you might notice is surface condition or minor heat-shield brackets, which the breaker can advise on.
The Škoda Rapid shares its MQB-precursor (PQ26) platform and several VAG Group engine families with models like the SEAT Toledo Mk4 and certain Polo variants, so cross-model fitment is genuinely possible when the engine code is identical. That said, whether a manifold from a specific donor vehicle in that group will fit your exact Rapid depends on the precise engine code, model year, and emissions calibration, so treat this as strong confirm-with-the-breaker territory before purchasing. Ask the breaker to verify the engine code on the donor car matches yours exactly rather than relying on model-name similarity alone.