Get quotes for a used or replacement Škoda Citigo exhaust manifold. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used exhaust manifold varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, all petrol Škoda Citigos have an exhaust manifold — it is the cast component that collects exhaust gases from the cylinder head and feeds them into the rest of the exhaust system. The Citigo was only ever sold in the UK with small naturally aspirated petrol engines (the 1.0 MPI three-cylinder family), so there is no turbocharger in the system, but a conventional exhaust manifold is present on every variant. Diesel Citigos were not sold in the UK, so if you have a UK-registered Citigo you will always be looking for a petrol exhaust manifold.
The Citigo received a facelift in 2017, but the core 1.0 MPI engine family carried across both the pre-facelift (2012–2016) and post-facelift (2017–2019) generations, so the exhaust manifold itself is often the same casting. However, emissions calibration and associated plumbing can differ between Euro 5 and Euro 6 variants, and a manifold from the wrong era may affect emissions compliance and MOT readiness. Confirm the engine code and Euro emissions standard on both the donor and recipient vehicle with the breaker before purchasing.
No — trim level has no bearing on exhaust manifold fitment for the Citigo. The S, SE, and Monte Carlo trims all used the same 1.0 MPI engine family, so the manifold is determined entirely by engine code and emissions era, not by what badge is on the tailgate. You may find cosmetic differences elsewhere on a donor car from a different trim, but the manifold itself will be the same part.
The most common UK engine codes in the Citigo 1.0 MPI family are CHYA and CHYB, covering the 60 PS and 75 PS outputs respectively — always check your own code on the engine bay sticker or V5C before contacting a breaker. Quoting your engine code rather than just the year gives the breaker the most accurate way to match the manifold to your car. If you are unsure of your code, your registration plate can be used by the breaker to look it up.
The exhaust manifold itself is a straightforward metallic component and is unlikely to directly cause an MOT failure, but a cracked or poorly sealing second-hand manifold can cause exhaust leaks that result in a failure on emissions or visible defects. The bigger emissions risk with used exhaust parts on the Citigo sits further down the system — particularly around the catalytic converter — which is strongly confirm-with-breaker territory given how catalyst condition and compatibility can vary between Euro 5 and Euro 6 cars. Make sure any used manifold is free from cracks and that the gasket faces are not warped before fitting.