Compare prices on a used Škoda Yeti washer motor from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used washer motor varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Škoda Yeti was produced as a single generation from 2009 to 2017, with a facelift arriving around 2013 that updated the front-end styling and some electrical components. Because the facelift can affect pump and reservoir design, a pre-facelift (2009–2013) washer motor may not be a straightforward swap onto a post-facelift (2013–2017) car, so confirm compatibility with the breaker against your exact registration before buying.
Yes, the Škoda Yeti is fitted with washer motors — typically a front washer pump and, on models equipped with a rear wash-wipe, a separate rear washer pump, both usually mounted on the washer fluid reservoir. When sourcing a used pump, tell the breaker whether you need the front or rear motor, as they are different parts and priced accordingly.
Engine size makes no difference to washer motor fitment on the Yeti — the pumps are the same regardless of whether your car has a petrol or diesel engine. Trim level (for example S, SE, Elegance, or Outdoor) also does not affect the washer motor itself, though higher trims with headlight washers may have an additional pump, so let the breaker know if your car has that feature.
Washer pumps across the VAG group are often shared components, and it is plausible that a pump from a contemporary Golf, Seat Leon, or Octavia could be compatible with the Yeti. However, reservoir fitting points and connector configurations can vary, so treat this as a lead rather than a guarantee and ask the breaker to cross-reference the part number against your Yeti's registration before purchasing.
The 2013 facelift brought changes to the Yeti's front end and ancillaries that could affect reservoir and pump design, so a 2011 pump crossing that boundary is not a guaranteed fit. Name your registration to the breaker so they can check part numbers on both sides of the 2013 facelift and confirm whether the pumps are interchangeable before you commit.
The drivetrain layout — front-wheel drive versus four-wheel drive — does not affect the washer motor, as this part is independent of how power is delivered to the wheels. You can disregard 4WD or FWD designation when sourcing this part, and focus instead on the model year relative to the 2013 facelift and whether you need a front or rear pump.