Compare prices on a used Škoda Superb cv joints from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two cv jointss are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
These span two different generations — the second-generation Superb (B6, 2008–2015) and the third-generation Superb (B8, 2015 onwards) — and the CV joints are not interchangeable across that boundary. Even within those generations, drivetrain layout (front-wheel drive versus 4x4 Scout/4x4 variants) and engine size can affect which joint is fitted. Confirm the exact part against your registration with the breaker before buying.
Trim level — whether it's SE, SE Technology, Elegance, Laurin & Klement, or Sportline — does not affect which CV joints are fitted; what matters is the generation, the drivetrain (FWD or 4WD), and the engine size. A joint from an Elegance and an SE of the same generation and drivetrain should be the same, so don't let trim names put you off. Always confirm against your registration with the breaker to be sure.
Yes, all Škoda Superb variants have CV joints — they are present on both front-wheel-drive and all-wheel-drive (4x4) versions, as the driven front wheels on all variants require constant velocity joints to transmit power through the steering and suspension movement. All-wheel-drive Superbs (badged 4x4 or Scout) also have CV joints on the rear driveshafts, so those models carry more joints in total. Make sure you tell the breaker which position — nearside (NS) or offside (OS) — and whether your car is FWD or 4WD.
Yes, this is one of the most important things to get right — the driveshaft and CV joint specifications differ between FWD and 4WD variants, and rear CV joints obviously only exist on the 4WD models. Always confirm your drivetrain with the breaker alongside your registration, as the wrong unit will not fit correctly.
Engine size and output can influence the driveshaft and CV joint specification used, as higher-torque engines sometimes require heavier-duty components, so a direct swap between a 2.0 TDI and a 1.6 TDI is not guaranteed even within the same generation. This is worth checking carefully with the breaker, who can cross-reference against your specific registration rather than just the model name. Never assume a like-for-like fit without that confirmation.
The B8 Superb received a facelift in 2019, and while the running gear was largely carried over, whether the CV joint specification changed at that point is something you should confirm with the breaker against your registration rather than assume. Name the boundary — pre-facelift 2015–2019 versus post-facelift 2019 onwards — when speaking to the breaker so they can check their parts match your exact build date. Do not assume a pre-facelift unit from a 2017 car will be identical to one from a 2021 car without that check.