Compare prices on a used Škoda Kamiq cv joints from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used cv joints that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Yes, the Kamiq genuinely has CV joints — it is a front-wheel-drive car (or available with 4Drive all-wheel drive on some variants), and CV joints are a standard part of any driven axle setup like this. Front CV joints are fitted to all Kamiqs as they transfer drive from the gearbox to the front wheels, and rear CV joints are present on 4Drive all-wheel-drive models as well. When contacting a breaker, it is worth confirming whether you need front or rear CV joints and whether your car is standard FWD or the 4Drive AWD variant.
The Škoda Kamiq was launched in 2019 and received a facelift in 2021, so a 2019 car sits in the pre-facelift period while a 2022 car is post-facelift. The facelift was primarily cosmetic, but whether CV joint specifications changed across that boundary is not something to assume — engine and drivetrain pairings are what really govern the joint size and spline count. Run both registrations past the breaker to confirm compatibility before purchasing.
Engine size and output can influence the specification of CV joints, as higher-torque drivetrains sometimes use joints with different spline counts or load ratings to cope with the extra power. The Kamiq is available with a range of petrol engines including 1.0 TSI and 1.5 TSI units, and these may not share identical CV joints. Always give the breaker your exact engine code alongside the registration so they can match the correct part.
Trim level does not affect CV joint fitment — the joints are determined by your drivetrain, engine, and whether you have FWD or 4Drive AWD, not by whether you have an S, SE, SE L, Monte Carlo, or Sportline specification. You may find cosmetic differences on parts surrounding the driveshaft area when dismantling, but the CV joint itself is unaffected by trim. Focus your search on matching the engine and drivetrain rather than the trim badge.
Yes — nearside (NS, driver's left) and offside (OS, driver's right) CV joints are handed on the Kamiq, and the two sides are not interchangeable. The driveshaft lengths differ between NS and OS on most front-wheel-drive layouts, so make sure you tell the breaker which side you need. Double-check by looking at your existing driveshaft or quoting the side when you make an enquiry.
The Kamiq, SEAT Arona, and Volkswagen T-Cross all share the same MQB A0 platform and are built around the same engine and drivetrain family, so there is a reasonable chance of overlap in CV joint specifications. However, subtle differences in driveshaft length, spline count, or joint rating can exist between badge-engineered variants, and assuming direct compatibility without checking is risky. Give the breaker both vehicle registrations and ask them to verify against the exact part numbers before agreeing a sale.