Compare prices on a used Škoda Kodiaq cv joints from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used cv joints that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
CV joints exist on all Škoda Kodiaq variants because even the front-wheel-drive models use them on the front driveshafts, and four-wheel-drive (4x4) versions additionally have CV joints on the rear driveshafts too. If you have a 4x4 Kodiaq, make sure you specify whether you need a front or rear CV joint when getting quotes from a breaker. FWD models only ever need front CV joints, so a rear CV joint from a 4WD car will not be relevant to you.
The original Škoda Kodiaq ran from 2016 to 2021, with the facelifted second-generation model arriving for 2022 onwards, so a 2018 car is first-gen and a 2022 car is second-gen. The driveshaft and CV joint dimensions can differ across that generation boundary, so you should confirm compatibility with the breaker against your exact registration rather than assuming a swap will work. Always quote your reg when requesting a quote so the breaker can check the part number.
Engine size can influence CV joint specification on the Kodiaq because higher-torque engines, such as the 2.0 TSI petrol or 2.0 TDI diesel, may use a more heavy-duty driveshaft and CV joint assembly compared with the smaller 1.5 TSI. When contacting a breaker, give them your engine size and fuel type as well as your registration, as quoting just 'Kodiaq' is not enough to guarantee the right part. This is especially important on 4x4 models where front and rear joints may also differ.
Trim level alone does not affect CV joint fitment on the Kodiaq; what matters is the drivetrain (FWD or 4x4), the engine, and the generation. An SE and a Sportline with the same engine and drivetrain will use the same CV joint, so do not pay extra or limit your search based on trim badge. Be aware though that if a Sportline or Edition car had a different engine or 4x4 as standard, that would be the relevant variable, not the trim name itself.
Yes, you should always tell the breaker whether you need the nearside (NS, left-hand side as you sit in the car) or offside (OS, right-hand side) CV joint, as the two sides are not always identical — inner and outer joint dimensions or spline counts can vary. Front driveshafts in particular often differ in length between NS and OS due to the gearbox position, so fitting the wrong side can mean the joint simply will not go together correctly. Confirm which side you need before the breaker pulls the part.
Gearbox type can affect driveshaft and CV joint specification because the output shaft dimensions and spline counts may differ between a manual and a DSG automatic gearbox. It is not safe to assume a CV joint from a manual Kodiaq will directly interchange with one from a DSG car, even if the engine size and generation match. Always confirm gearbox type with the breaker alongside your registration to make sure the splines and joint sizes are correct.