Findapart

Škoda Superb Coil Spring Replacement Parts

Compare prices on a used Škoda Superb coil spring from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Superb coil spring

Used coil springs vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Superb parts

Used coil spring for other Škoda models

Fitment questions

Do Škoda Superb coil springs actually exist on all versions, or is it a different suspension setup?

Yes, coil springs are fitted to the Škoda Superb across all three generations, both front and rear, on saloon and estate body styles. The Superb uses a conventional coil spring and damper setup, so coil springs are a genuine part to be sourcing from a breaker. There are no variants that delete coil springs entirely in favour of a fundamentally different system, so you can proceed with confidence that this is the right part to search for.

Will a coil spring from a Mk2 Superb (2008–2015) fit my Mk3 Superb (2015 onwards)?

No – the Mk2 Superb (2008–2015) and the Mk3 Superb (2015 onwards) are built on different platforms and the springs are not interchangeable between generations. Always source a spring from the correct generation to match your car. Confirm the exact part with the breaker using your registration to be safe.

Does it matter whether my Superb is a 1.4 TSI or a 2.0 TDI when buying a used coil spring?

Engine size can influence spring rates because heavier engines place different loads on the front suspension, so a 1.4 TSI and a 2.0 TDI Superb may not share identical front springs even within the same generation. For the rear, differences are less clear-cut but cannot be ruled out. Quote your exact engine size and registration to the breaker so they can cross-reference the correct spring for your variant.

I have a Mk3 Superb (2015 onwards) – does the 2019 facelift affect which coil spring I need?

The Mk3 Superb received a facelift in 2019 that was primarily cosmetic, and in most cases the running gear was carried over, but whether the coil springs are identical across the pre-facelift and post-facelift Mk3 is something you should confirm with the breaker against your registration rather than assume. Name the boundary – pre-2019 or post-2019 – when contacting breakers so they can check their stock accordingly. Do not assume a pre-facelift spring will drop straight in without verification.

Does the trim level matter – for example, will a spring from an SE fit a Superb Sportline or Laurin & Klement?

Trim level alone does not typically determine which coil spring is fitted – the key variables are generation, engine size, and axle position rather than whether the car is badged SE, SE Technology, Sportline, or Laurin & Klement. That said, Sportline models may have firmer or lowered suspension variants, so confirm with the breaker whether the donor car's suspension spec matches yours rather than relying on trim name alone. Springs are inexpensive to get wrong and ride height differences can cause handling issues, so it is worth the extra check.

Does it matter whether I need a NS (nearside) or OS (offside) coil spring on the Superb?

For the front axle, left and right coil springs on the Superb are generally symmetrical and often the same part, but this can vary by specific application, so it is worth mentioning which side you need when contacting a breaker. At the rear, springs are similarly often shared side-to-side, but again confirm this with the breaker using your registration. Getting the side confirmed costs nothing and avoids any risk of fitting an incorrect spring.