Findapart

Škoda Octavia CV Joints Replacement Parts

Get quotes for a used or replacement Škoda Octavia cv joints. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Octavia cv joints

A used cv joints that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Octavia parts

Used cv joints for other Škoda models

Fitment questions

Do CV joints from a Mk2 Octavia fit a Mk3 Octavia?

The Octavia Mk2 ran from 2004 to 2013 and the Mk3 from 2013 to 2020, and although both are front-wheel-drive platforms they use different subframe geometry and driveshaft spline counts, so they are not a straightforward swap. Parts sitting either side of that 2013 boundary are worth treating as non-interchangeable until confirmed otherwise. Always check the part number on your existing CV joint or driveshaft and ask the breaker to match it against your registration before buying.

Will a CV joint from a 2010 Octavia fit my 2015 Octavia?

A 2010 car is a late Mk2 and a 2015 car is a Mk3, so you are crossing a generation boundary and fitment is very unlikely to be direct. CV joint dimensions, spline count and outer diameter can all differ between these platforms. Confirm the part number with the breaker against both registrations before proceeding.

Does the Škoda Octavia actually have CV joints?

Yes, every Octavia has CV joints regardless of variant. Front-wheel-drive Octavias use inner and outer CV joints on both front driveshafts, and the four-wheel-drive vRS and Scout models add CV joints to the rear driveshafts as well. So this is a genuine and commonly replaced part on this model.

Does it matter whether I get a CV joint from an SE or a vRS Octavia?

Trim level itself does not affect CV joint fitment, but the vRS models typically carry larger or higher-output engines and the four-wheel-drive versions have rear CV joints that SE or SE Technology cars simply do not have. The key things to match are engine size, driven axle (front or rear), and side (NS nearside or OS offside), not the trim badge. Ask the breaker to cross-reference against your registration to be sure you are getting the right driveshaft diameter and spline count.

Do I need to specify nearside or offside when buying a used Octavia CV joint?

Yes, always specify NS (nearside, passenger side) or OS (offside, driver side) when ordering, as the two driveshafts are different lengths on most Octavia variants. Getting the wrong side will mean the joint does not fit correctly. If you are unsure which side you need, your breaker can advise based on your registration.

Does CV joint fitment differ between petrol and diesel Octavias of the same generation?

Within the same generation, the main factor is engine displacement rather than fuel type, as larger or more powerful engines can use driveshafts with a different spline count or diameter to handle the extra torque. For most standard petrol and diesel engines of similar size within a generation, the joints are often shared, but this is not guaranteed across all variants. Give the breaker your registration and engine code so they can verify the correct part for your specific car.