Need a used Škoda Superb brake pedal? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used brake pedal that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Superb has run across three distinct generations: the Mk1 (2001–2008), the Mk2 (2008–2015, facelifted around 2013), and the Mk3 (2015–present, facelifted around 2019), and pedal box assemblies are not interchangeable across these generation boundaries. Within the same generation, fitment is generally consistent, but whether a pre-facelift pedal crosses to a post-facelift car is something you should confirm with the breaker against your registration. Always give the breaker your full reg so they can verify the exact part number.
Yes, every variant of the Škoda Superb – petrol, diesel, manual, automatic, front-wheel drive, and four-wheel-drive – has a conventional brake pedal, so this is a genuine part you can source from a breaker. There are no drivetrain configurations on the Superb that would eliminate the brake pedal, unlike something such as a propshaft which only exists on 4WD models. You can search with confidence that the part exists on whichever Superb you own.
The brake pedal itself – the foot-operated lever in the cabin – is not typically varied by engine size on the Superb; it is the braking hardware further down the system (calipers, discs, master cylinder) where differences linked to engine size and weight can appear. For the pedal assembly, generation is the key factor, not whether your car has a 1.4 TSI or a 3.6 V6. Confirm the exact part against your reg with the breaker to be safe, but engine size is unlikely to be the deciding variable here.
Trim level – whether your car is an SE, SE L, Elegance, or Laurin and Klement – does not affect which brake pedal is fitted, as this is a mechanical component unrelated to interior specification or equipment level. The pedal may have a different rubber cover or finish depending on trim, so the one you receive from a breaker might look slightly different cosmetically, but the underlying fitment should be the same within the same generation. Give the breaker your reg and confirm, but trim is not a barrier here.
No – the Mk2 Superb (2008–2015) and the Mk3 Superb (2015–present) are built on different platforms, so the pedal box and brake pedal assemblies are not designed to cross that generation boundary. This is one of the clearest cut-off points in the Superb range, and parts from either side should be treated as incompatible without verification. A breaker will be able to confirm using your registration whether any overlap exists, but do not assume interchangeability across this boundary.
Body style – saloon or estate (Combi) – does not affect the brake pedal, as the pedal assembly sits in the same firewall and bulkhead area shared across both body styles within a given generation. The mechanical braking components that can vary, such as rear discs or load-sensing valves, are further back in the system and not part of the pedal itself. Generation and model year are what matter most, so give the breaker your reg and they will identify the right part regardless of whether your car is a saloon or Combi.