Findapart

Škoda Felicia CV Joints Replacement Parts

Get quotes for a used or replacement Škoda Felicia cv joints. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Felicia cv joints

No two cv jointss are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Felicia parts

Used cv joints for other Škoda models

Fitment questions

Does the Škoda Felicia have CV joints?

Yes, the Škoda Felicia is a front-wheel-drive car throughout its entire production run (1994–2001), so it uses CV joints on both front driveshafts to transmit drive while allowing the wheels to steer and the suspension to move. There are inner and outer CV joints on each side (NS and OS), and they are a standard wear item you can source from a breaker. If your Felicia is making a clicking noise on full lock, a worn outer CV joint is a very common cause.

Will a CV joint from a 1996 Felicia fit a 1998 Felicia?

The Škoda Felicia ran from 1994 to 2001 with a facelift around 1998, but the fundamental front-wheel-drive platform, floorpan and driveshaft layout did not change across that update. In practice, CV joints and driveshafts are widely regarded as shared across the full production run, but because the facelift year is a model boundary, you should confirm the exact part against your registration with the breaker before buying. Engine size can also affect the driveshaft specification, so tell the breaker your engine as well.

Does engine size affect which CV joint or driveshaft fits my Felicia?

Yes, engine size is worth declaring when you enquire, because driveshaft and CV joint dimensions can vary between the smaller units (such as the 1.3 and 1.6 petrol) and other variants in the range. Running gear components are more likely to differ with power output and torque than with trim level or colour. Always give the breaker your exact engine size and registration so they can match the correct shaft.

Does the trim level affect which CV joint I need on a Felicia — for example, does a GLX need a different one to a base-spec car?

Trim level does not determine CV joint fitment on the Škoda Felicia — the drivetrain components are dictated by the engine and model year, not by whether the car is a base, LX, GLX or Pohoda specification. You may find cosmetic differences between cars stripped for parts at a breaker, but the CV joint itself will be the same across trims sharing the same engine. Confirm engine size and year with the breaker and trim becomes irrelevant to the part selection.

Do I need to specify nearside or offside when ordering a Felicia CV joint?

Yes, always specify NS (nearside, kerb side, left) or OS (offside, driver's side, right) when ordering, as the two driveshafts on a front-wheel-drive Felicia are often different lengths and are not interchangeable between sides. The inner and outer joints on each shaft can also differ, so tell the breaker whether you need the inner joint (at the gearbox end) or the outer joint (at the wheel hub). Getting both details right avoids a wasted journey or a return.

Can I use a CV joint from a Felicia van on a Felicia hatchback?

The Felicia was sold in van (Felicia Van) form as well as hatchback and estate, and while the basic platform is shared, the van's payload and GVW rating can influence running gear specifications. You should not assume the van and car driveshaft components are identical — confirm directly with the breaker, quoting your body style, engine, and registration, so they can check the correct part. This is especially worth doing if the donor vehicle at the breaker is a different body style to yours.