Findapart

Cheap Škoda Scala CV Joints

Get quotes for a used or replacement Škoda Scala cv joints. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Scala cv joints: what matters

Fitment on a used cv joints varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Scala parts

Used cv joints for other Škoda models

Fitment questions

Do Škoda Scala CV joints actually exist, or is it a front-wheel-drive only car?

The Škoda Scala is a front-wheel-drive only model, and CV joints absolutely exist on it — in fact, front-wheel-drive cars rely entirely on CV joints to transfer drive from the gearbox to the front wheels through the steering and suspension movement. Every Scala variant, regardless of engine, has inner and outer CV joints on both driveshafts. You'll need to confirm whether you need the nearside (NS, left) or offside (OS, right) joint when requesting a quote from a breaker.

Will a CV joint from a 2019 Scala fit a 2022 Scala?

The Škoda Scala has been produced from 2019 onwards as a single generation with no fundamental platform change introduced at a well-established mid-life point that would be expected to alter driveshaft specifications. However, whether a specific CV joint or driveshaft from an earlier build crosses over cleanly to a later one — particularly across any minor running changes — is something you should confirm with the breaker against your exact registration number. Engine size can also influence driveshaft dimensions, so make sure the breaker knows your engine as well as the year.

Does engine size affect which CV joint fits a Škoda Scala?

Yes, engine size can affect driveshaft and CV joint specification on the Scala, as higher-torque or larger-displacement engines sometimes use heavier-duty driveshaft components. The Scala was offered with a range of petrol and mild-hybrid engines including 1.0 TSI and 1.5 TSI units, so always tell the breaker your exact engine when sourcing a CV joint. Matching the engine as well as the year gives the breaker the best chance of supplying the correct part.

Does the trim level affect which CV joint I need on a Škoda Scala — for example, does an SE differ from an Ambition?

Trim level does not affect CV joint fitment on the Škoda Scala — the drivetrain components are determined by the engine and model year, not by whether your car is an S, SE, Ambition, Monte Carlo, or any other trim. You may find cosmetic differences between trim-level donor cars at the breaker, but the CV joint itself will be the same for a given engine variant. Confirm the engine and side (NS or OS) rather than worrying about the trim badge.

Can I use a Škoda Octavia or VW Golf CV joint on my Scala?

The Scala shares the MQB-A0 platform with several other VAG group vehicles, which means there is some parts commonality across the group, but CV joint specifications vary depending on the exact driveshaft length, spline count, and engine torque rating fitted to each specific model. It's worth raising this with the breaker, as a good dismantler will cross-reference part numbers rather than assuming platform compatibility equals direct fitment. Never assume a CV joint fits just because the platform is shared — always verify against your registration.

How do I know if I need the inner or outer CV joint on my Škoda Scala?

On a front-wheel-drive car like the Scala, the outer CV joint sits at the wheel end of the driveshaft and is the one most commonly worn, often showing as a clicking noise on full steering lock; the inner CV joint connects to the gearbox end and tends to produce vibration or clunking under load. When contacting a breaker, tell them which side (nearside or offside), which end (inner or outer), your engine size, and your registration so they can match the correct driveshaft specification. If you're unsure which joint is faulty, a mechanic's diagnosis before you order will save you returning the wrong part.