Findapart

Škoda Yeti CV Joints Replacement Parts

Compare prices on a used Škoda Yeti cv joints from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Yeti cv joints

No two cv jointss are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Yeti parts

Used cv joints for other Škoda models

Fitment questions

Do Škoda Yeti CV joints from a 2009–2013 model fit a 2013–2017 facelift Yeti?

The Yeti ran from 2009 to 2017, with a facelift arriving in 2013 that brought styling changes but the underlying platform and drivetrain architecture remained broadly the same. CV joints from either side of that 2013 boundary may well interchange, but subtle changes to driveshaft spline counts or hub carrier geometry across the facelift mean you should confirm the exact part number with the breaker against your registration before purchasing. Never assume fitment across a facelift boundary without that check.

Does the Škoda Yeti actually have CV joints?

Yes, all Yeti variants have CV joints — they are fitted to the front driveshafts on every model, and four-wheel-drive Yetis (badged with 4x4 or carrying the Haldex rear axle) also have CV joints on the rear driveshafts. So whether you have a front-wheel-drive or 4WD Yeti, CV joints are present; the 4WD cars simply have more of them. When searching, make sure you specify front or rear, and NS (nearside, passenger side) or OS (offside, driver side).

Does engine size affect which CV joint fits my Yeti?

Engine size can influence driveshaft and CV joint sizing on some platforms because larger, torquier engines may use heavier-duty driveshafts. On the Yeti the range spanned 1.2 TSI, 1.4 TSI, 1.6 TDI, and 2.0 TDI engines, so it is worth telling the breaker your exact engine code — not just the displacement — to ensure the joint and shaft diameter are a match for your car. Confirming against your registration is the safest route.

Does the trim level — for example S, SE, Elegance, or Outdoor — change which CV joint I need?

Trim level on the Yeti does not affect CV joint fitment; S, SE, Elegance, and Outdoor trims are cosmetic and equipment-level differences rather than mechanical ones. What matters is your drivetrain (front-wheel drive or 4WD), your engine code, and the side (NS or OS) you need. You can buy from any trim variant at a breaker as long as the drivetrain and engine specs match your own car.

Will a front-wheel-drive Yeti CV joint fit a 4WD Yeti?

Not necessarily — while the front CV joints on FWD and 4WD Yetis may share similarities, the 4WD models use a different rear axle setup via a Haldex coupling, meaning rear CV joints are unique to the 4WD variants and simply do not exist on FWD cars. Even for the front, the additional torque loads of the 4WD system can mean different shaft specifications, so always tell the breaker whether your car is FWD or 4WD when sourcing any CV joint. Confirming against your registration is essential here.

My Yeti is a 2011 — can I use a CV joint from a 2015 car?

A 2011 Yeti is a pre-facelift car, and a 2015 Yeti is post-facelift (the facelift arrived in 2013), so there is a generation boundary between them. In many cases the underlying driveshaft architecture carried over, but minor revisions across that 2013 facelift mean fitment is not guaranteed. Confirm the part numbers with the breaker using both registrations, and let them check before you commit to buying.