Need a used Škoda Superb alloy wheels? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used alloy wheels varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Also known as: alloys, rim, rims.
The Superb has run across three generations: the first-generation (Mk1) from 2001 to 2008, the second-generation (Mk2) from 2008 to 2015, and the third-generation (Mk3) from 2015 onwards, with a facelift in 2019. Alloy fitment is determined by bolt pattern (PCD), offset, and centre bore rather than model year alone, so these generation boundaries are your starting point when sourcing used wheels. Always confirm the exact PCD, offset, and centre bore of any alloys against your registration with the breaker before purchasing.
The Mk2 Superb (2008–2015) and the Mk3 (2015–present) both use a 5x112 PCD, which is the standard Volkswagen Group bolt pattern, so the bolt pattern itself is not a barrier. However, offset and centre bore can differ between generations, and crossing this generation boundary means you should confirm the specific offset and centre bore of the wheels you are sourcing against your car's registration with the breaker before buying. Never assume fitment across a generation change without that check.
Trim level — whether that's SE, SE L, Sportline, or Laurin & Klement — does not affect the fundamental fitment of alloys, as fitment is governed by PCD, offset, and centre bore, not trim. What you may notice is a difference in style, finish, or size between trim grades, since higher trims like Laurin & Klement or Sportline were often fitted with larger or more distinctive wheels from the factory. As long as the PCD, offset, and centre bore match your car, alloys from any Superb trim will physically fit, though do confirm the specifics with the breaker against your registration.
Because the Superb shares its platform and Volkswagen Group underpinnings with the Passat, both use a 5x112 PCD, making cross-model interchange within the VW Group genuinely common. Offset and centre bore still need to match, and these can vary between specific model years and variants even within the same group, so this is not a blanket guarantee. Confirm the exact offset and centre bore of any Passat alloys you are considering against your Superb's registration with the breaker before purchasing.
No — engine and gearbox type have no bearing on alloy wheel fitment for the Škoda Superb. Whether your car is a 1.5 TSI petrol, a 2.0 TDI diesel, or a plug-in hybrid iV model, the relevant fitment factors are solely PCD, offset, and centre bore. You can safely ignore engine references when browsing alloys and focus your questions to the breaker on those three measurements confirmed against your registration.
Your 2018 car sits in the pre-facelift Mk3 Superb, while a 2021 car falls after the Mk3 facelift introduced in 2019, so you are crossing a facelift boundary within the same third generation. The underlying PCD of 5x112 is consistent across the Mk3, but offset and centre bore, as well as wheel size, can change between pre- and post-facelift fitments even within a generation. Confirm the specific offset and centre bore of the 2021 wheels against your 2018 registration with the breaker before committing to a purchase.