Findapart

Used Škoda Enyaq CV Joints

Compare prices on a used Škoda Enyaq cv joints from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Enyaq cv joints: what matters

Fitment on a used cv joints varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Enyaq parts

Used cv joints for other Škoda models

Fitment questions

Does the Škoda Enyaq have CV joints?

Yes, all Škoda Enyaq variants have CV joints — they are a fundamental part of any electric vehicle drivetrain, transferring torque from the motor to the driven wheels through the suspension's range of movement. The rear-wheel-drive and four-wheel-drive Enyaq variants have CV joints at both axles, while the front-wheel-drive variants have them at the front axle only. If you are looking for a used CV joint, make sure the breaker knows your exact drivetrain layout (front-wheel drive, rear-wheel drive, or four-wheel drive) as well as your registration, since the shafts and joints differ between configurations.

Will a CV joint from a 2021 Enyaq fit my 2024 model?

The Enyaq launched in the UK in 2021 and received a facelift in 2024, so a 2021 and a 2024 car sit either side of a meaningful model update. The generation is broadly the same platform, but whether the CV joints themselves are interchangeable across that facelift boundary is not something to assume — confirm directly with the breaker against both registrations before purchasing. Make sure you also match the drivetrain (front-wheel drive versus rear-wheel drive versus four-wheel drive), as the joint specifications differ between them.

Does it matter whether I specify NS or OS when buying a used Enyaq CV joint?

Yes, absolutely — CV joints and driveshafts are handed, so the nearside (NS, kerb side) and offside (OS, driver's side) are different parts and are not interchangeable. Always tell your breaker which side you need, and double-check this against your own vehicle before ordering. Getting the side wrong means the part will simply not fit.

Does my Enyaq's trim level — for example iV60, iV80, or Sportline — affect which CV joint I need?

Trim level by itself does not determine CV joint fitment — what matters is the drivetrain layout and motor output, not the badge or interior specification. However, the iV80 four-wheel-drive variant adds a rear motor and therefore has rear CV joints that the front-wheel-drive iV60 does not have at all, so the drivetrain difference here is genuine and important. Tell the breaker your exact variant and registration rather than relying on trim name alone, as motor configurations can vary within trim lines.

Can I use a CV joint from an Enyaq iV60 on an Enyaq iV80 4x4?

Not directly — the iV60 is front-wheel drive, so it only has front driveshafts and CV joints, whereas the iV80 4x4 has both front and rear driveshafts with their own joints. Even if a front joint happened to be dimensionally similar, the rear joints on the 4x4 are specific to that axle and motor assembly and would have no equivalent on the iV60. Always supply your registration to the breaker and specify whether you need a front or rear joint and which side.

Are Enyaq CV joints shared with any other Volkswagen Group electric vehicles?

The Enyaq is built on the Volkswagen Group MEB platform, which it shares with vehicles like the Volkswagen ID.4 and ID.5, and there may be some component commonality at platform level. However, whether a specific CV joint from an ID.4 or another MEB vehicle will directly interchange with your Enyaq depends on the exact motor variant and axle configuration, so do not assume compatibility without verification. Put the question to your breaker with both registrations and let them confirm against the part numbers before committing to a purchase.