Findapart

Second Hand Peugeot 2008 Power Steering Pump

Need a used Peugeot 2008 power steering pump? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Peugeot 2008 power steering pump

Used power steering pumps vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Peugeot 2008 parts

Used power steering pump for other Peugeot models

Fitment questions

Does the Peugeot 2008 actually have a power steering pump?

The vast majority of Peugeot 2008 models use electric power steering (EPS), which is controlled electronically and has no hydraulic pump at all. This applies to both the first generation (2013–2019) and second generation (2019 onwards). If your steering is heavy or faulty, the part you are most likely looking for is the electric power steering rack or the EPS control module, not a hydraulic pump.

My 2008 has heavy steering - what part do I actually need from a breaker?

Because the Peugeot 2008 uses electric power steering throughout its entire production run, there is no hydraulic pump to replace. The most common causes of heavy or failed electric steering on the 2008 are a faulty steering rack (which contains the electric motor and sensor), a failed EPS ECU, or a wiring/connector issue. A good breaker can supply a used steering rack or EPS module matched to your registration, which is the correct starting point.

Will a power steering rack from a first-gen 2008 (2013–2019) fit a second-gen 2008 (2019 onwards)?

The first-generation 2008 ran from 2013 to 2019 and the second generation from 2019 onwards, and these are fundamentally different platforms, so the steering racks are not interchangeable between generations. Even within each generation, the rack unit can vary with engine fitment and steering calibration, so you should always confirm the correct part against your exact registration with the breaker before buying.

Does it matter which trim level my 2008 is - Active, Allure, GT Line or GT - when sourcing a steering rack?

Trim level does not affect which steering rack is fitted to the Peugeot 2008, so an Active, Allure, GT Line or GT car of the same generation and engine should carry the same rack. What does matter is the generation and engine variant, so give the breaker your registration to confirm the correct unit rather than relying on trim name alone.

Will a steering rack from a 2017 2008 fit a 2019 2008?

This question spans the first-to-second generation changeover, which makes it a boundary case: the first generation ran to 2019 and the second generation started in 2019, so a 2017 car is clearly first-gen but a 2019 car could be either generation depending on build date. You must confirm with the breaker using both vehicles' registrations, as the two platforms use different steering assemblies and the part will not interchange across generations.

Could I be confusing the power steering pump with another part on my Peugeot 2008?

Yes, this is a common mix-up. Because the 2008 has never used hydraulic power steering, there is no pump, fluid reservoir, or associated pipes to replace. If a garage or parts site is listing a 'power steering pump' for your 2008, it is worth double-checking whether they actually mean the electric steering rack assembly or EPS motor unit, as those are the serviceable components on this car.