Used Peugeot 2008 Intercooler

Only the turbocharged engine variants of the Peugeot 2008 have an intercooler — these are the petrol and diesel turbo engines, such as the 1.2 PureTech petrol and the 1.6 BlueHDi diesel. Naturally aspirated engines do not use forced induction and therefore have no intercooler at all. If you are unsure whether your engine is turbocharged, check your V5 or run a VIN check to confirm your engine code before searching for this part.

The Peugeot 2008 runs in two distinct generations: the first generation (Mk1) covered roughly 2013 to 2019, and the second generation (Mk2) launched in 2019. A 2014 car is Mk1 and a 2020 car is Mk2, and these generations use different platforms and engine configurations, so intercoolers from one generation are very unlikely to be compatible with the other. Always confirm fitment with the breaker using your full engine code and registration.

Trim level does not affect intercooler fitment — what matters is your engine code, not whether the car is badged Active, Allure, GT Line, or GT. Two 2008s with identical engine codes will use the same intercooler regardless of trim. Be aware that ancillary brackets or pipework orientation can occasionally vary, so confirm the specific part against your registration with the breaker.

The Mk1 Peugeot 2008 received a mid-life facelift in 2016, and while many mechanical components carried over, minor changes to ancillary fittings and mounting points are possible either side of that boundary. If your engine code is unchanged across the facelift, the core intercooler unit may well be the same, but you should confirm this directly with the breaker against your registration rather than assume it.

The single most useful thing you can give a breaker is your full engine code, which you will find on your V5 registration document or via a VIN check — the 1.2 PureTech family covers several variants with different power outputs, and the engine code will distinguish between them. Also confirm your gearbox type (manual or automatic) and the model year, as these help the breaker identify the exact specification. With those details, a good breaker will be able to cross-reference their stock accurately.

The Peugeot 2008, 208, and 308 share engines from the same PSA family, so it is not impossible that some intercooler units overlap — particularly on shared engine codes like the 1.2 PureTech or 1.6 BlueHDi. However, the physical fitment, pipe routing, and bracket positions can differ between models even on the same engine, so this is not something to assume without verification. Give the breaker both the donor vehicle and your own registration and engine code so they can confirm whether the part is a genuine match.