Peugeot 108 Bumper Replacement Parts

The Peugeot 108 was produced from 2014 to 2022, sharing its A-segment platform with the Toyota Aygo and Citroën C1 of the same generation. A facelift was introduced in 2018, which brought revised front-end styling including updated bumpers, grille and lights. When sourcing a used bumper, establishing whether your car is pre-facelift (2014–2017) or post-facelift (2018–2022) is the most important step before approaching a breaker.

A 2016 108 is a pre-facelift car and a 2019 is post-facelift, so these sit either side of the 2018 styling update, meaning the bumpers are unlikely to be a straight swap. The facelift changed the front-end design, so parts from these two periods are not necessarily interchangeable. Confirm with the breaker using both registrations before purchasing, as they can check the actual panel profiles against their stock.

No — front bumpers on the 108 are shared across body styles within the same generation and facelift period, so door count does not determine fitment. What matters is whether your car is pre-facelift (2014–2017) or post-facelift (2018–2022). Give the breaker your registration and they can confirm the exact panel required.

Trim level does not affect the structural fitment of the bumper on the Peugeot 108 — the panel itself is the same across Active, Allure, and special editions such as Roland Garros within the same facelift period. However, you may find cosmetic differences such as colour, finish, or fog light apertures depending on the specification of the donor car. When buying from a breaker, check whether any trim-specific details like fog lamp bezels or paint code match what you need, and confirm against your registration to be sure.

Yes, all 2014–2017 Peugeot 108s are pre-facelift models and share the same front-end styling, so a bumper from any car in that range should correspond to the same design as yours. Engine choice and trim level do not affect which bumper is fitted within this period. Always confirm with the breaker against both registrations before purchase, as fitment can never be fully guaranteed without physical verification.

Give the breaker your full registration number, which allows them to identify your exact facelift period and specification quickly. It also helps to know whether you need the front or rear bumper, your car's paint code (usually found on a sticker in the engine bay or door shut), and whether your car has fog lights fitted. The more detail you provide upfront, the better chance the breaker has of matching a panel that suits your car without unnecessary returns.