Findapart

Cheap Nissan Juke Wheel Arch Liner

Get quotes for a used or replacement Nissan Juke wheel arch liner. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Nissan Juke wheel arch liner

Used wheel arch liners vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Nissan Juke parts

Used wheel arch liner for other Nissan models

Fitment questions

Will a wheel arch liner from a first-gen Nissan Juke fit my second-gen Juke?

No — the Juke was completely redesigned for the second generation (2019 onwards), so the body panels and wheel arch shapes are entirely different from the first generation (2010–2019). A liner from the earlier car will not fit the newer one, and vice versa. Always confirm the generation with your breaker against your registration plate.

Does a wheel arch liner from a 2014 facelift Juke fit a pre-facelift model from 2012?

The first-generation Juke ran from 2010 to 2019, with a facelift arriving in 2014 that brought changes to the front and rear styling. Because facelifts can involve subtle pressing changes to the bodywork around the wheel arches, whether a pre-facelift liner swaps directly with a post-facelift one is not guaranteed — confirm this with the breaker using both registration numbers before buying.

Does the trim level affect which wheel arch liner I need — for example, does an Acenta liner differ from an N-Connecta or Tekna liner?

Trim level does not affect which wheel arch liner you need on the Nissan Juke — the liner fits the bodyshell, not the specification level. You may find minor cosmetic differences such as colour or surface finish between liners from different trim grades, but fitment is determined by the generation and which corner of the car you need (nearside front, offside rear, and so on). Tell your breaker your generation and the exact position, and trim level does not need to factor into the search.

Will a 2WD Juke wheel arch liner fit an AWD four-wheel-drive Juke of the same year?

Yes — wheel arch liners on the Nissan Juke are determined by the body and generation, not by the drivetrain. The 2WD and AWD variants share the same bodyshell and wheel arch openings, so the liners interchange freely across drivetrains within the same generation. Just confirm the position (nearside or offside, front or rear) and the generation with your breaker.

Do I need to know my engine size when searching for a used Juke wheel arch liner?

No — engine size and type have no bearing on which wheel arch liner fits a Nissan Juke. The liner is a body component that fits the wheel arch opening in the bodyshell, which is the same regardless of whether the car is a 1.0-litre, 1.2-litre, or 1.6-litre variant. Give the breaker your registration number, the generation, and the corner you need, and engine details can be ignored.

Can I use a wheel arch liner from a Nissan Juke that was sold in another market on my UK car?

The UK Juke and some of its international equivalents may share platforms, but differences in local-market pressing changes or variant-specific bodywork mean this is not straightforward to confirm. Rather than assuming fitment, route this question directly to your breaker, who can cross-reference the part numbers against your registration to check compatibility before you commit to a purchase.