Hyundai Kona Handbrake Cable Replacement Parts

The Hyundai Kona (2017 onwards) uses an electronic parking brake (EPB) operated by a dashboard switch, not a traditional cable-operated handbrake — so there is no physical handbrake cable on this model. If you are hearing a fault or seeing a warning light related to the parking brake, the issue will be with the EPB actuator, EPB module, or a rear brake component rather than a cable. You may want to search for the EPB actuator or speak to a breaker about the electronic parking brake assembly for your specific year of Kona.

It is very likely there has been a mix-up, as the Kona does not use a handbrake cable on any variant — all versions use an electronic parking brake. The seller may have listed the part incorrectly, or the listing may refer to a different model entirely. We would recommend contacting the breaker directly, describing the electronic parking brake fault you have, and asking specifically for the EPB actuator or related components rather than a cable.

No — even the Kona N performance variant retains an electronic parking brake rather than a mechanical cable-operated system. There is no trim level, engine variant, or drivetrain option across the Kona range that uses a traditional handbrake cable. If a performance or motorsport application requires a mechanical handbrake, that would involve an aftermarket conversion, not a factory part.

For a faulty parking brake on a Hyundai Kona, the parts to look for are the electronic parking brake actuator (sometimes called an EPB motor) mounted on the rear caliper, or potentially a rear brake caliper with the EPB mechanism integrated. Confirm with the breaker which exact component you need against your registration, as the rear brake setup may vary between the standard Kona and the Kona Electric. A breaker who specialises in Hyundai will be able to identify the correct part from your reg plate.