Cheap Hyundai Ioniq 5 Exhaust Manifold
Get quotes for a used or replacement Hyundai Ioniq 5 exhaust manifold. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Hyundai Ioniq 5 exhaust manifold
Used exhaust manifolds vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's petrol or diesel
- State the engine code if known
Other used Hyundai Ioniq 5 parts
- Used Hyundai Ioniq 5 EGR Valve
- Used Hyundai Ioniq 5 Catalytic Converter
- Used Hyundai Ioniq 5 Exhaust System
- Used Hyundai Ioniq 5 Lambda Sensor
- Used Hyundai Ioniq 5 Bonnet Strut
- Used Hyundai Ioniq 5 Track Rod
- Used Hyundai Ioniq 5 Washer Motor
- Used Hyundai Ioniq 5 Central Locking Motor
- Used Hyundai Ioniq 5 Airbag
- Used Hyundai Ioniq 5 Windscreen
- Used Hyundai Ioniq 5 Wheel Hub
- Used Hyundai Ioniq 5 Brake Servo
Used exhaust manifold for other Hyundai models
Fitment questions
Does the Hyundai Ioniq 5 have an exhaust manifold?
No — the Hyundai Ioniq 5 is a fully battery-electric vehicle with no internal combustion engine, so it has no exhaust manifold, exhaust system, catalytic converter, or DPF of any kind. If you are searching for an exhaust manifold for an Ioniq 5, it is possible you have the wrong model in mind, or you may be thinking of the Hyundai Ioniq (first generation, 2016–2022), which was available as a hybrid, plug-in hybrid, and pure electric and did have an exhaust system on its petrol-engined variants. Double-check your registration and the model name before requesting quotes from a breaker.
I need an exhaust part for my Ioniq 5 — what should I actually be looking for?
Because the Ioniq 5 is fully electric, there are no exhaust components whatsoever on the car — no manifold, downpipe, centre pipe, or back box. If you are hearing an unusual noise or have a workshop telling you an exhaust part is needed, it is worth going back and confirming the exact model and drivetrain, as the advice may relate to a different vehicle. If you do own a first-generation Hyundai Ioniq hybrid (2016–2022) rather than the Ioniq 5, a breaker can help you source the correct exhaust parts once you confirm your engine code and registration.
Could an exhaust manifold from another Hyundai fit the Ioniq 5?
No other exhaust manifold will fit the Ioniq 5 because the car has no engine bay provisions for one — it is a purpose-built electric vehicle on Hyundai's E-GMP platform. There is no combustion, no exhaust gas, and no mounting point for an exhaust manifold anywhere on the vehicle. If you have been quoted for this part against an Ioniq 5 registration, we would recommend querying that quote directly with the breaker, as it is likely a case of mistaken model identification.
Is there any variant or trim of the Ioniq 5 that has an exhaust manifold — for example, the N Line or N version?
No — every variant of the Hyundai Ioniq 5, including Standard Range, Long Range, AWD, N Line trim, and the high-performance Ioniq 5 N, is fully battery-electric with no combustion engine and therefore no exhaust manifold. The Ioniq 5 N uses the same electric drivetrain principle, just with higher-output motors, so it still has no exhaust system. No trim level, battery size, or drivetrain configuration changes this fundamental fact.
I think I might have the wrong model — what Hyundai models do have an exhaust manifold?
If you need an exhaust manifold for a Hyundai, you are most likely looking for a combustion-engined model such as the first-generation Ioniq hybrid or plug-in hybrid (2016–2022), the Tucson, i30, i20, or Kona in petrol or diesel form, among others. To get accurate quotes from a breaker, you will need your registration number and ideally your engine code, as exhaust manifolds are matched to the specific engine rather than the model name alone. A breaker can look up the correct part against your plate to make sure you are ordering the right component.