Findapart

Used Škoda Yeti Suspension Leg

Need a used Škoda Yeti suspension leg? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Yeti suspension leg

A used suspension leg that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Yeti parts

Used suspension leg for other Škoda models

Fitment questions

What is a suspension leg and does the Škoda Yeti actually have one?

A suspension leg (also called a MacPherson strut) combines the damper and the structural upright into a single unit, and yes, the Škoda Yeti uses MacPherson struts at the front axle, so front suspension legs are a genuine part on this model. The rear suspension uses a different arrangement, so when buyers refer to a Yeti suspension leg they are almost always talking about a front nearside (NS) or offside (OS) unit. Make sure you specify which side you need when requesting quotes from a breaker.

Will a suspension leg from an early Škoda Yeti fit my later one — does the 2013 facelift matter?

The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift introduced in 2013 that brought styling and equipment updates. The facelift did not involve a fundamental platform change, but suspension geometry components can vary across a production run, so a pre-2013 leg may not be a guaranteed match for a post-2013 car. Name the boundary to your breaker and confirm fitment against your specific registration before agreeing a purchase.

Does engine size affect which suspension leg I need for my Yeti?

Engine size can influence the suspension specification on the Yeti because heavier or more powerful drivetrains can carry different spring and damper rates, and the geometry of the strut assembly may differ between, for example, a 1.2 TSI and a 2.0 TDI. Always tell the breaker your exact engine size and whether your car is 2WD or 4WD (4x4), as the 4WD variants add weight that may affect the part specification. Matching engine size and drivetrain layout to the donor car is strongly recommended.

Does it matter whether my Yeti is S, SE, Elegance or Scout trim when buying a suspension leg?

Trim level alone — whether S, SE, Elegance, or Scout — does not change the fundamental suspension leg part on the Yeti, so a leg from a lower trim car is not automatically wrong for a higher trim one. That said, if your car has sport or lowered suspension, or if it is a Scout with raised ride height, the spring and damper rates may differ from a standard-spec car; confirm this possibility with the breaker against your registration. The trim badge itself is not a reliable guide — describe your car's actual ride height and specification.

Do I need a suspension leg from a 4WD Yeti to match my 4WD car?

It is important to match the drivetrain layout, because 4WD Yetis have a rear beam and overall weight distribution that differs from 2WD versions, and this can affect the front suspension specification. Tell the breaker clearly whether your car is the 2WD or 4WD variant so they can source from a matching donor vehicle. Never assume a 2WD donor leg will be an identical fit for a 4WD Yeti without the breaker confirming this against both registrations.

Can I buy just one suspension leg, or do I need to replace both sides at once?

You can buy a single suspension leg from a breaker — NS or OS — and that is a common way to replace a failed unit on a used-car budget. Mechanics often recommend replacing in pairs so that the handling remains balanced, especially if the opposite leg has high mileage or unknown service history, but this is a decision for you and your garage rather than a fitment rule. Make sure you clearly state whether you need the nearside (passenger side) or offside (driver side) leg when contacting breakers on Findapart.