Need a used Škoda Octavia suspension leg? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two suspension legs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
No — the Mk2 Octavia ran from 2004 to 2013 and the Mk3 from 2013 onwards, and these are entirely different platforms with different suspension geometry, so the legs are not interchangeable. Always buy within the correct generation. Confirm the exact boundary year with the breaker against your registration, as 2013 cars can fall either side depending on build date.
On the Octavia, engine size can influence suspension specification because heavier or more powerful engines may be paired with uprated components, so a 2.0 TSI or TDI leg is not always a straight swap for one from a 1.0 or 1.2 petrol car of the same generation. When contacting a breaker, give them your full registration so they can match the correct spec. This is especially important on the Mk3 (2013 onwards) where the engine range is wide.
No — suspension legs are side-specific, so you must order the correct nearside (driver's left, passenger side in the UK) or offside (driver's right) leg for your car. Fitting the wrong side will result in incorrect geometry and is unsafe. Always specify NS or OS clearly when requesting a quote from a breaker.
Both years fall within the Mk3 generation (2013 onwards), which is a good start, but the Mk3 received a facelift in 2017 and there may be differences in suspension components across that boundary. Name the facelift year to the breaker and ask them to verify the part number matches your registration before agreeing to buy. Do not assume all Mk3 legs are interchangeable without that check.
Trim level alone does not change the basic suspension leg fitment on the Octavia, so an S and an SE of the same generation and engine size will generally share the same leg. However, the vRS uses sportier suspension settings and may have different damper or spring rates, so confirm with the breaker whether a vRS-sourced leg matches your non-vRS car or vice versa. Cosmetic differences between trim levels won't affect the part itself.
The front suspension legs are generally shared across hatchback and estate body styles within the same Octavia generation, as the front subframe and geometry are the same. At the rear it is worth checking, as estate variants can carry additional load and may in some cases have slightly different spring or damper rates. Confirm against your registration with the breaker to be sure you're getting the right spec for your body style and engine.