Need a used Škoda Citigo suspension leg? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used suspension leg varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, the Citigo uses MacPherson strut suspension at the front, so it does have front suspension legs (also called front struts). The rear uses a torsion beam setup, which does not use individual suspension legs. When searching for a used unit, make sure you specify front NS (nearside/left) or OS (offside/right), as breakers will list them separately.
The Škoda Citigo ran as a single generation from 2011 to 2019 in the UK, with a facelift arriving around 2016-2017. Within this span the basic MacPherson strut architecture remained consistent, but whether a pre-facelift leg crosses directly onto a post-facelift car without issue is something you should confirm with the breaker against your registration, as subtle mounting or spring-seat changes can occur at a facelift point. Giving the breaker your full VIN or reg is the safest approach.
The Citigo was offered in the UK in 1.0-litre petrol form throughout its life, so there is no significant variation in engine weight or power output to drive differences in the suspension leg specification. In practice, engine size is unlikely to be a deciding factor here, but it is still worth quoting your exact registration to the breaker to rule out any minor variant differences.
Trim level does not affect suspension leg fitment on the Citigo – the S, SE, and Colour Edition trims all share the same underpinnings. You may find cosmetic differences such as dust cap colours or minor surface finishing on used parts pulled from different trim cars, but these have no bearing on whether the leg will fit and work correctly. Buy on generation and side (NS or OS), not on trim badge.
Some Citigos may have been fitted with sport or lowered suspension variants, either from the factory or as an aftermarket modification, and these can use different spring rates or strut lengths compared to standard cars. Whether your specific car has a non-standard setup is something to confirm with the breaker by quoting your registration, as they can cross-reference the specification before supplying a part. Fitting a standard-rate leg onto a car set up for sport suspension, or vice versa, may affect ride height and handling.
Yes, the nearside (left/driver's side in a right-hand-drive UK car) and offside (right/passenger's side) front suspension legs are handed and are not interchangeable. Always specify NS or OS clearly when requesting a quote from a breaker, and double-check this matches the side that needs replacing on your car before agreeing a price.