Compare prices on a used Škoda Yeti horn from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used horn that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Yes, all variants of the Škoda Yeti were fitted with a horn as standard — it is a legal requirement on UK road-going vehicles, so every engine and trim level has one. You will find it mounted in the engine bay, typically behind the front bumper near the NS or OS headlight area. Whether you have a pre-facelift or post-facelift Yeti, the car definitely came with one.
The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift introduced in 2013 that brought changes to the front end including the bumper and grille area. Because the horn is mounted in the engine bay and connects via a simple two-wire plug, fitment across the pre-facelift (2009–2013) and post-facelift (2013–2017) divide is quite possible, but the bracket position and connector type can differ — confirm with the breaker that the mounting and plug match your exact car using your registration before buying.
Trim level does not affect horn fitment on the Škoda Yeti — the horn is a functional safety component and is not upgraded or changed between S, SE, Elegance, or Laurin & Klement trims. You may find cosmetic differences in how the horn is bracketed depending on what else is in that corner of the engine bay, but the horn unit itself is interchangeable across trims. Any used Yeti horn from the right generation should suit you regardless of what trim the donor car was.
Engine type does not affect horn fitment — the horn is mounted in the engine bay but is independent of the drivetrain. A horn from a 1.2 TSI petrol Yeti and a 2.0 TDI diesel Yeti are effectively the same unit and will interchange freely. Focus your checks on generation and plug compatibility rather than engine variant.
Škoda, Volkswagen, SEAT and Audi often share horn units across the wider VAG group, so a horn from a contemporary Octavia, Fabia or even a VW Golf of the same era may well be compatible with your Yeti. That said, mounting bracket design and connector type can vary between models, so treat this as a useful lead rather than a guarantee, and confirm the part number or plug type with the breaker before committing.
Give the breaker your full registration number so they can confirm the exact model year and specification — this is the most reliable way to ensure the mounting bracket, connector, and any fixings will match. It is also worth mentioning whether your Yeti is pre-facelift (built before 2013) or post-facelift (2013 onwards) if you know it, as the front-end layout differs slightly between the two. A good breaker will cross-reference the part number from the donor car against your registration to give you the best chance of a straight swap.