Compare prices on a used Škoda Yeti brake from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used brake varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Yeti ran from 2009 to 2017 in one generation, with a facelift arriving for the 2014 model year, and that facelift boundary is worth flagging to your breaker because brake components don't always carry straight across it. Name that 2013-to-2014 crossover point when you contact the breaker and ask them to check the specific part against your registration number. Never assume a pre-facelift part is a direct swap onto a facelifted car without the breaker confirming it.
Yes, engine size is one of the key fitment factors for brakes because Škoda typically fitted larger or uprated brake discs and callipers to the higher-powered engines to handle the extra performance. A 1.2 TSI Yeti and a 2.0 TDI or 2.0 TSI Yeti are likely to have different brake specifications front and rear, so always tell the breaker your exact engine size alongside your registration. Quoting your reg is the safest way to make sure the breaker pulls the right spec from their vehicle.
For brakes, trim level in itself does not drive fitment — the Yeti's S, SE, Elegance, and Outdoor grades are not the deciding factor. What matters is the generation (pre- or post-2014 facelift) and your engine size, which can influence brake disc diameter and calliper spec. Give the breaker your registration and engine size rather than just your trim name, and you should get an accurate match.
The Yeti was available in both front-wheel-drive and four-wheel-drive versions, and the drivetrain layout can affect brake specification particularly at the rear axle. It's possible the front brakes differ too depending on the engine and weight rating of the four-wheel-drive variant. Confirm with the breaker by giving them both your registration and the registration of the donor vehicle so they can cross-reference the exact spec.
For disc-and-calliper assemblies and brake hoses, side can matter, so make clear to the breaker whether you need the nearside (NS, left as you sit in the car) or offside (OS, right). Brake discs themselves are usually side-agnostic, but callipers and sliding pins can be handed, so don't assume. Ask the breaker to confirm whether the specific component from their vehicle is handed before you buy.
The Yeti was produced as a single generation from 2009 to 2017, so you will see that full date range used, but a facelift in 2014 means there can be differences in components across that span. Whether a part from, say, a 2011 car fits a 2016 car depends on the specific component, the engine, and whether there were any mid-run engineering changes — which is something to route to the breaker rather than assume. Give the breaker your registration and let them check the part numbers against their donor vehicle to confirm compatibility.