Findapart

Cheap Škoda Yeti Cylinder Head

Need a used Škoda Yeti cylinder head? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Yeti cylinder head

No two cylinder heads are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Yeti parts

Used cylinder head for other Škoda models

Fitment questions

Will a cylinder head from an earlier Škoda Yeti fit my newer one?

The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift in 2013, so there is no full model-generation boundary to cross — but the facelift did bring some engine and ancillary updates, meaning a head from a pre-2013 car may not be a straight swap onto a post-2013 car even with the same engine code. The engine code is the single most reliable guide here: check your V5 or run a VIN check to find it, then give that code to the breaker so they can match like-for-like. Whether specific ancillary fittings or coolant ports differ across the 2013 facelift boundary is something you should confirm with the breaker against your registration before buying.

Does the cylinder head from a 1.2 TSI Yeti fit a 1.4 TSI Yeti?

No — the 1.2 TSI and 1.4 TSI are different engines with different engine codes, and their cylinder heads are not interchangeable despite both being petrol turbos in the same bodyshell. Always match by engine code rather than by engine size or fuel type alone; for example, a CBZB head will not suit a CAXA application. Give your exact engine code to the breaker and ask them to confirm it matches the donor vehicle.

Does it matter whether my Yeti is an S, SE, Elegance, or Outdoor trim when buying a used cylinder head?

No — trim level makes no difference to cylinder head fitment on the Škoda Yeti; the S, SE, Elegance, and Outdoor trims all use the same mechanical engines matched to their engine codes. What you should be aware of is that used heads may arrive with different ancillary brackets, sensors, or covers depending on the donor car's specification, so check with the breaker what is included. The head itself is determined entirely by engine code, not by the badge on the tailgate.

Does it matter if my Yeti is a diesel or petrol when sourcing a cylinder head?

Yes, absolutely — diesel and petrol cylinder heads are completely different components and are not interchangeable under any circumstances. Common Yeti diesel engine codes include the CFHC and CAYC (both 2.0 TDI variants), while petrol engines include codes such as CBZB (1.2 TSI) and CAXA (1.4 TSI); always verify your own code on your V5 or via a VIN check. Give the breaker your exact engine code and fuel type to make sure they match the head to the correct application.

I have a 2014 facelift Yeti — will a cylinder head from a pre-facelift 2012 model work?

The 2013 facelift is the boundary to watch here: while the Yeti ran continuously from 2009 to 2017, some engine variants were updated or replaced around the facelift, and ancillary drillings or sensor positions may differ even where the core engine code looks similar. If your engine code is identical on both the donor and recipient car that is a strong starting point, but whether a pre-2013 head crosses that facelift boundary cleanly onto your 2014 car is something you must confirm with the breaker against your specific registration before purchasing.

Do I need to worry about ECU or immobiliser pairing when fitting a used cylinder head to my Škoda Yeti?

This is worth raising directly with the breaker and your fitting garage, as ECU pairing and immobiliser coding can vary depending on what electronics are attached to or supplied with the head. We cannot state as fact exactly which Yeti configurations require coding work after a head swap, so treat this as a question to ask before you commit to a purchase. A good breaker will advise on what ancillaries come with the head and flag any known coding requirements for your engine code.