Get quotes for a used or replacement Škoda Roomster suspension leg. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used suspension leg that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Yes, the Roomster uses MacPherson strut suspension legs at the front axle, so this is a genuine part on the car. The rear uses a torsion beam setup, so suspension legs are a front-only item on this model. When searching, make sure you specify front NS (nearside/left) or OS (offside/right), as you need the correct side.
The Roomster was produced in one main generation from 2006 to 2015, with a facelift arriving in 2010 that updated styling but did not fundamentally change the front suspension architecture. Parts from within the pre-facelift (2006–2010) or post-facelift (2010–2015) periods are generally considered interchangeable within each phase, but whether a pre-facelift leg crosses cleanly to a post-facelift car is worth confirming with the breaker against your registration, as subtle changes can occur around a facelift year. Always give the breaker your full reg so they can verify against the actual vehicle record.
Engine size can influence front suspension components on some cars, but for the Roomster the front strut leg fitment is primarily driven by the generation and model year rather than whether you have the 1.2, 1.4, 1.6 petrol or 1.4 TDI, 1.6 TDI diesel. That said, if your car was fitted with any optional sport or uprated suspension, the damper rates could differ, so confirm with the breaker if you have any reason to think your car's suspension differs from standard. Give the breaker your reg to be sure.
Trim level alone does not affect suspension leg fitment on the Roomster – a leg from a Classic or Comfort car will physically be the same strut as one from a Sport or Scout of the same year in most cases. The Scout did feature raised ride height, and Sport trim may have carried different spring or damper rates, so if your car is a Scout or Sport spec it is worth flagging this to the breaker to ensure the donor car matched your setup. Trim differences are mainly cosmetic and do not change the strut housing itself.
A 2008 Roomster sits in the pre-facelift phase (2006–2010) while a 2013 car is post-facelift (2010–2015), so you are crossing a generation boundary where there is a greater chance of variation. The basic MacPherson strut design is shared across the full production run, but whether the specific strut dimensions, spring seat or ABS sensor bracket are identical across that boundary is something to confirm with the breaker using both registrations. A good UK breaker will be able to check both vehicles on the system before dispatching the part.
The Roomster shares its platform roots with the Fabia and uses components from the wider VW Group parts bin, so there is genuine parts commonality across some years, but exact interchangeability of the suspension leg depends on the specific year and specification of both vehicles. This is a question to put directly to the breaker with your Roomster's registration, as they will know which donor vehicles they regularly use for Roomster struts and can confirm compatibility before you buy. Do not assume fitment based on platform sharing alone.