Need a used Škoda Karoq suspension leg? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used suspension legs vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
A suspension leg (also called a MacPherson strut) combines the shock absorber and spring mount into a single unit and forms the main front suspension component on the Karoq. Yes, the Škoda Karoq uses MacPherson struts at the front, so suspension legs are a genuine part on this model. If you need a rear suspension component, the Karoq uses a multi-link rear setup, so ask your breaker for the correct rear item by name.
The Škoda Karoq ran in its first generation from 2017, with a facelift arriving for the 2022 model year. The suspension leg geometry may well be shared across this boundary, but whether a pre-facelift strut crosses directly to a post-facelift car is something you should confirm with the breaker against your exact registration, as running gear can be quietly revised during a facelift. Give the breaker both the donor car's year and your car's VIN to be sure.
Engine size can influence front suspension components because heavier or more powerful variants may use uprated struts to cope with different loads. The Karoq was offered with a range of engines including 1.0 TSI, 1.5 TSI, and 2.0 TDI and TSI units, and it is worth telling the breaker which engine your car has when sourcing a leg. Do not assume a strut from a 1.0 TSI donor will be a guaranteed fit on a 2.0-engined car without checking.
Trim level alone does not determine which suspension leg you need, so an SE and an SE L on the same engine should use the same strut in principle. However, the Sportline trim may have different spring or damper rates as part of its sportier setup, and this is something you should confirm with the breaker rather than assume. Focus on matching the year, engine size, and which side you need (NS for nearside/left, OS for offside/right) and let the breaker verify the sport suspension question against your registration.
Yes, suspension legs are side-specific because they are mirror images of each other, so always tell the breaker whether you need the NS (nearside, left as you sit in the car) or OS (offside, right as you sit in the car). Ordering the wrong side is a common and frustrating mistake, so double-check before you request a quote. If you are unsure which side is which, your garage or the breaker can help you confirm it.
These are both first-generation Karoqs built within the same pre-facelift production run, so the mounting points are likely to be compatible, but the difference in engine size means you should not take compatibility for granted. Heavier or more powerful engines can be paired with uprated struts, and a 1.5 TSI may differ from a 1.0 TSI in ways that are not obvious from the outside. Run both registrations past the breaker so they can cross-reference the part numbers before you commit.