Findapart

Second Hand Škoda Kamiq Suspension Leg

Get quotes for a used or replacement Škoda Kamiq suspension leg. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Kamiq suspension leg

A used suspension leg that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Kamiq parts

Used suspension leg for other Škoda models

Fitment questions

Does the Škoda Kamiq actually have a suspension leg, or is it called something different?

Yes, the Škoda Kamiq uses MacPherson strut suspension at the front, and the suspension leg (also called a strut or MacPherson leg) is a genuine part on this car. It combines the damper and the top mount assembly into a single unit, and you will need to specify NS (nearside/left) or OS (offside/right) when sourcing one. It is a standard front-wheel-drive setup, so all Kamiq variants have front suspension legs regardless of engine.

Will a suspension leg from an earlier Kamiq fit my newer one — does the Kamiq have a facelift I need to worry about?

The Škoda Kamiq was introduced in 2019 and received a facelift in 2021, and it is worth naming that boundary when you contact a breaker because minor suspension geometry changes can accompany a refresh. Parts from a pre-facelift (2019–2021) car and a post-facelift (2021 onwards) car may or may not interchange, so you should confirm with the breaker against your exact registration rather than assume they are the same.

Does engine size affect which suspension leg I need for my Kamiq?

Engine size can influence suspension components because heavier or more powerful variants are sometimes set up with different spring and damper rates, and the Kamiq is offered with a range of engines from the 1.0 TSI through to the 1.5 TSI. The physical strut leg may share the same basic part number across smaller engine variants, but confirm with the breaker against your registration to be certain yours is not a different specification. Always quote your reg so the breaker can cross-reference the correct part.

Does the trim level affect which suspension leg I need — will a leg from an S fit an SE or an SE L?

Trim level — whether your Kamiq is an S, SE, or SE L — does not in itself determine the suspension leg fitment, as these trim grades reflect interior and equipment differences rather than changes to the running gear. The one area to be cautious about is if your car has sport suspension or a lowered setup, which some trim or options packages can include, and in that case you should confirm with the breaker that the spring and damper specification matches yours. As long as the suspension spec is the same, a leg from a lower trim should physically fit.

Do I need to specify nearside or offside when buying a used Kamiq suspension leg?

Yes, you must specify the side — NS (nearside, left-hand side as you sit in the car) or OS (offside, right-hand side) — because left and right suspension legs are not interchangeable. When contacting a breaker, state the side clearly alongside your registration number to avoid being sent the wrong part. Some listings may use left/right rather than NS/OS, so double-check which convention the breaker is using.

Is a suspension leg from a SEAT Arona or Volkswagen Polo the same as the one on my Škoda Kamiq?

The Škoda Kamiq shares the MQB-A0 platform with the SEAT Arona and Volkswagen Polo, and there is a reasonable chance that suspension components share part numbers across these models, but platform sharing does not guarantee that every variant's suspension leg is identical given differences in weight, engine tuning, and market specification. This is a question worth putting directly to a breaker who can cross-reference part numbers against your specific registration. Never assume a cross-model fit without verification.