Need a used Škoda Yeti oil cooler? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two oil coolers are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Yes, most Škoda Yeti variants are fitted with an oil cooler, though whether yours has one depends primarily on the engine fitted rather than the model year or trim level. Turbocharged petrol and diesel engines — which cover the vast majority of Yetis sold in the UK — typically use an oil cooler to manage heat under load. If you are unsure whether your specific engine has one, check your V5 for the engine code and confirm with the breaker.
The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift introduced in 2013 that brought some mechanical and ancillary updates, so a 2010 and a 2014 car sit either side of that boundary. Engine code is the critical factor here — if both cars share the same engine code, there is a reasonable chance of compatibility, but ancillary and mounting details can change across a facelift even on the same engine family. Confirm compatibility with the breaker against your registration number before purchasing to be safe.
Yes, the engine code is the single most useful piece of information you can supply — it tells the breaker far more than the year or trim level alone. Two Yetis from the same year can carry different engines with different oil cooler designs, so always check your engine code on your V5 or via a VIN check before enquiring. Supply that code to the breaker and it will save time and reduce the risk of ordering the wrong part.
Trim level makes no difference to the oil cooler fitted — whether your Yeti is an entry-level S, a mid-range SE, an Elegance, or a top-spec Laurin & Klement, the oil cooler is determined entirely by the engine fitted, not the badge on the tailgate. You may find minor cosmetic or equipment differences between trim levels on a donor car, but these have no bearing on mechanical parts like the oil cooler. Match on engine code and you can disregard trim entirely.
The 1.2 TSI and 2.0 TDI are different engine families with different cooling requirements, and the oil cooler designs are not interchangeable between them. Both are turbocharged engines and both can be fitted with oil coolers, but you must match the part to your specific engine code rather than just the fuel type or displacement. Give the breaker your engine code from the V5 and they can identify the correct unit for your car.
For the engine oil cooler specifically, gearbox type is generally less critical than engine code, since the engine oil cooling circuit is separate from the transmission. However, some engines have oil cooler configurations that can vary depending on ancillary packaging around different gearbox options, so gearbox type is worth mentioning to the breaker when you enquire. To be sure, confirm compatibility against your full registration or engine code with the breaker rather than assuming it will fit.