Compare prices on a used Škoda Yeti alloy wheels from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used alloy wheels that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Also known as: alloys, rim, rims.
The Škoda Yeti was produced from 2009 to 2017 and received a significant facelift in 2013, which updated the styling including the wheels and trim. For alloy wheel fitment the key technical factors are bolt pattern (PCD), offset, and centre bore rather than the model year alone. Confirm the exact specs of any wheel you're buying against your registration with the breaker before purchasing.
The Yeti retained the same 5x112 PCD and 57.1 mm centre bore across both the pre-facelift and facelift generations, so wheels from either era can often interchange. However, because the 2013 facelift is a known boundary point, you should confirm with the breaker that the offset of the specific wheels matches your car before buying. Styling differences between pre- and post-facelift wheels may also mean a cosmetic mismatch even if the dimensions are correct.
Trim level does not affect alloy wheel fitment on the Yeti — what matters is PCD (5x112), offset, and centre bore (57.1 mm), which are consistent across S, SE, Elegance, and Outdoor variants. Different trims did come with different factory wheel designs and sizes, so a set from a higher trim may look different or have a different offset to one from a base-spec car. Confirm the exact offset of the donor wheels with the breaker against your registration to be sure they suit your car.
Škoda, VW, SEAT, and Audi share the 5x112 PCD and 57.1 mm centre bore across a wide range of models, so cross-brand fitment is common and many wheels do interchange. Offset (ET rating) still needs to match your Yeti's requirements, and whether a slightly different offset works with your specific tyre size is something you should confirm with the breaker rather than assume. TPMS sensor compatibility is also something to check with the breaker, as sensors are not always interchangeable between brands and generations.
Škoda Yeti alloys were fitted in sizes ranging from 16 to 18 inches depending on trim and model year, all using the 5x112 bolt pattern. Physically larger or smaller wheels from another Yeti can fit the hub correctly provided the PCD, offset, and centre bore match, but you would need to adjust tyre sizing to maintain the correct overall rolling diameter. Discuss any change in wheel diameter with the breaker, particularly if the offset differs from standard, as clearance and handling can be affected.
A 2011 Yeti is a pre-facelift car and a 2015 model sits in the post-facelift generation, so this question does span the 2013 facelift boundary. The underlying hub specs — 5x112 PCD and 57.1 mm centre bore — were carried across that boundary, meaning fitment is often possible, but you should confirm the offset of the specific 2011 wheels with the breaker against your 2015 registration before committing. There may also be a noticeable styling difference between pre- and post-facelift wheel designs, which is worth considering if aesthetics matter to you.