Get quotes for a used or replacement Škoda Octavia oil cooler. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two oil coolers are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Yes, oil coolers are fitted to many Octavia variants, but not all — they are most commonly found on diesel engines and higher-output petrol engines, where managing oil temperature is more critical. Naturally aspirated lower-output petrol engines in the Octavia often do not have a dedicated oil cooler. The surest way to confirm whether your specific engine has one is to check your engine code (found on your V5 or via a VIN check) with a breaker before ordering.
The Mk2 Octavia ran from 2004 to 2013 and the Mk3 from 2013 to 2020, and despite some shared VAG engine families across those generations, the oil cooler mounting, housing design and coolant circuit routing changed between them. Crossing that generational boundary means you should not assume a direct swap — confirm fitment against your exact engine code with a breaker. Engine code is the critical detail here, not just the engine displacement or fuel type.
No — the oil cooler is an engine-mounted mechanical component and is determined entirely by the engine, not the body style. A hatchback and an estate Octavia with identical engine codes will use the same oil cooler. Focus on supplying your engine code to the breaker rather than mentioning body style.
Trim level makes no difference to oil cooler fitment; what matters is the engine code fitted to your car. The vRS models typically use higher-output engines that may have a different oil cooler specification to the same-displacement engine in a lower trim, but that is a consequence of the engine code being different, not the vRS badge itself. Give the breaker your engine code and they will match the correct unit.
The Mk3 Octavia was facelifted in 2017, and while many running-gear components carried over, ancillary and mounting details can change at facelift points without a full engine code change. If your engine code is identical before and after the facelift, fitment is likely but not guaranteed — confirm against your registration with the breaker, as mid-production ancillary changes are something only they can verify against their stock.
Engine displacement and fuel type narrow things down but are not sufficient on their own, because the 2.0 TDI was fitted in multiple states of tune with different engine codes (for example CFHC, CLJA, DFCA and others across the generations), and the oil cooler can differ between those variants. Pull the engine code from your V5 or a VIN check and give that to the breaker — it is the single most useful piece of information and avoids ordering the wrong part.