Findapart

Cheap Škoda Scala Oil Cooler

Compare prices on a used Škoda Scala oil cooler from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Scala oil cooler

Used oil coolers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Scala parts

Used oil cooler for other Škoda models

Fitment questions

Does the Škoda Scala actually have an oil cooler?

Yes, the Scala does have an oil cooler on certain engine variants — specifically the turbocharged petrol engines such as the 1.0 TSI and 1.5 TSI, where managing oil temperature under load is important. Naturally aspirated engines are not fitted to the Scala, so all production engines are turbocharged and an oil cooler is a genuine fitment across the range. That said, the exact type and configuration of the oil cooler can vary by engine code, so always match by engine code rather than just engine size.

Will an oil cooler from a 2019 Scala fit a 2022 Scala?

The Škoda Scala was launched in 2019 and received a facelift in 2022, so a 2019 car sits in the pre-facelift generation and a 2022 car is a facelifted model. The engine codes carried over across this boundary for most variants, and oil coolers follow the engine code rather than the model year, but whether ancillary fittings or mounting points changed at the facelift refresh is something you should confirm with the breaker against your exact registration. Supply your engine code — found on your V5C or via a VIN check — and the breaker can match it precisely.

Does the trim level affect which oil cooler a Scala needs — for example, does an SE differ from an SE L?

Trim level makes no difference to oil cooler fitment on the Scala; SE, SE L, and any other trim designation are cosmetic and equipment-level distinctions, not mechanical ones. What matters is the engine code, which is shared across trims fitted with the same engine regardless of badge. Give the breaker your engine code and they can identify the correct part without needing to know your trim level.

Does a 1.0 TSI oil cooler interchange with a 1.5 TSI oil cooler on the Scala?

These are different engines with different engine codes — the 1.0 TSI and 1.5 TSI are distinct units and their oil coolers are not interchangeable. Always source an oil cooler matched to your specific engine code rather than just the displacement. Your engine code is the most important detail to give a breaker, and it appears on your V5C logbook or can be retrieved via a VIN check.

Can I use a Volkswagen or SEAT oil cooler on my Škoda Scala given they share platforms?

The Scala is built on the MQB-A0 platform shared with vehicles like the VW Polo and SEAT Arona, and mechanical parts including oil coolers can sometimes cross over between these models where the engine codes match. However, cross-platform interchangeability depends on the exact engine code and whether mounting or ancillary connections are identical, so this is something to confirm with the breaker rather than assume. Give the breaker both your Scala's engine code and the donor vehicle's engine code and they can advise whether the part is a genuine match.

How do I make sure I order the right used oil cooler for my Škoda Scala?

The single most useful piece of information is your engine code, which you can find on your V5C logbook or by running a VIN check — it is a short alphanumeric code that identifies your exact engine variant. Alongside that, tell the breaker your model year and registration so they can cross-reference any production changes. Oil cooler fitment on the Scala follows the engine code above everything else, so as long as that matches the donor vehicle the part should be correct, but always let the breaker confirm final fitment.