Findapart

Cheap Škoda Kamiq Oil Cooler

Get quotes for a used or replacement Škoda Kamiq oil cooler. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Kamiq oil cooler

No two oil coolers are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Kamiq parts

Used oil cooler for other Škoda models

Fitment questions

Does the Škoda Kamiq actually have an oil cooler?

Yes, the Kamiq does have an oil cooler on most of its engine variants — it is fitted as part of the engine lubrication system to help manage oil temperature, particularly on the turbocharged petrol and diesel engines that make up the bulk of the Kamiq range. Because every Kamiq engine is turbocharged (the range has no naturally aspirated options), oil cooling is a genuine requirement across the lineup. That said, the exact cooler unit, its configuration, and mounting can vary by engine code, so confirming your specific engine code from your V5 or a VIN check is essential before sourcing a used part.

Will a Kamiq oil cooler from a 2019 fit my 2023 Kamiq?

The Škoda Kamiq was launched in 2019 and received a facelift in 2021, so a 2019 car sits in the pre-facelift generation and a 2023 car is a post-facelift example — crossing that boundary. Engine codes are the decisive factor here, and if your 2023 and the donor 2019 share the same engine code (for example both running the 1.0 TSI on code DKRF or the 1.5 TSI on DPCA), there is a reasonable basis for compatibility, but ancillary mounting changes introduced at or around the 2021 facelift mean you should confirm the exact part reference with the breaker against your registration before buying.

Does the trim level affect which oil cooler I need — for example, does an SE fit differently to an SE L or Monte Carlo?

Trim level — whether SE, SE L, Monte Carlo, or any other — has no bearing on oil cooler fitment; the cooler follows the engine, not the badge. A Monte Carlo with the 1.0 TSI will take the same oil cooler as an SE with the same engine code, so do not pay extra or search differently based on trim. What matters is matching the engine code, fuel type, and gearbox type (manual or automatic) from the donor car to your own.

Does it matter whether my Kamiq is petrol or diesel when sourcing an oil cooler?

Yes, fuel type matters because the petrol and diesel engines in the Kamiq are entirely different units with different oil cooler designs — a cooler from a 1.6 TDI diesel will not be compatible with a 1.0 TSI petrol, for instance. Always match on engine code first, which will inherently capture the fuel type. Confirm the engine code from your V5 logbook or a VIN check and supply it to the breaker so they can match the correct unit from their dismantled stock.

Does the gearbox type — manual or DSG automatic — change which oil cooler I need?

For the engine oil cooler itself, the gearbox type is generally not the primary driver of fitment — the cooler is tied to the engine code rather than the transmission. However, DSG-equipped Kamiq models also have a separate gearbox oil cooler for the transmission fluid, which is a distinct part, so make sure you and the breaker are clear on whether you need the engine oil cooler or the DSG cooler. Confirm with the breaker against your registration to be sure no ancillary differences apply to your specific combination.

I've found a Kamiq oil cooler from a breaker but they only have the registration, not the engine code — is that enough?

A registration alone can get you a long way, as breakers can typically run it through their systems to pull the engine code and specification, but supplying your own engine code as well is the safest approach. The engine code is stamped on the engine itself and listed on your V5, and cross-referencing both the donor reg and your own engine code gives you and the breaker the best chance of confirming a match. Never rely on registration alone if you can avoid it, particularly when crossing model years near the 2021 facelift boundary.