Findapart

Škoda Enyaq Oil Cooler Replacement Parts

Need a used Škoda Enyaq oil cooler? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Enyaq oil cooler

Used oil coolers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Enyaq parts

Used oil cooler for other Škoda models

Fitment questions

Does the Škoda Enyaq actually have an oil cooler?

The Enyaq is a fully electric vehicle (BEV) with no combustion engine, so it has no engine oil cooler of the kind found on petrol or diesel cars. Electric motors use different thermal management systems, and any cooling components on the Enyaq relate to the battery, power electronics, or motor — not engine oil. If your V5 shows the Enyaq and you are chasing a cooling-related fault, you are most likely looking for a battery thermal management component, a heat exchanger, or a coolant pump rather than an oil cooler.

I've been quoted an oil cooler for my Enyaq — could the breaker mean something else?

It is possible the breaker is using 'oil cooler' loosely to describe a thermal management heat exchanger or gearbox/inverter cooling component, as these can sometimes carry that label in parts catalogues. The Enyaq has no combustion engine and therefore no engine oil cooler in the traditional sense, so double-check exactly which part number and function the breaker is referring to before purchasing. Ask them to confirm the part's location and what fluid it is cooling, and match that against your specific fault or requirement.

What cooling parts should I actually be searching for on a Škoda Enyaq?

Depending on your fault, the parts you may genuinely need include the high-voltage battery cooling system components (such as the chiller or coolant distribution unit), the electric motor cooling circuit parts, power electronics coolers, or associated coolant pumps and heat exchangers. These are real, complex, and variant-specific parts that differ between the Enyaq iV 60, iV 80, iV 80x, and RS iV variants, so supplying your full VIN or registration to the breaker is especially important here. None of these are interchangeable with a conventional oil cooler and searching under that term is unlikely to find the right part.

Does it matter which Enyaq variant I have when sourcing thermal management parts?

Yes — the Enyaq range spans rear-wheel-drive single-motor variants (60, 80) and four-wheel-drive dual-motor variants (80x, RS iV), and the cooling architecture differs between these layouts because dual-motor cars have additional thermal demands. The Enyaq launched in the UK from 2021, with a facelift introduced for the 2024 model year, and cooling system components may differ across that boundary. Always provide your registration or VIN to the breaker so they can confirm the correct part for your specific drivetrain configuration.

Will a thermal management part from an early Enyaq (pre-2024) fit a facelifted 2024-on car?

The Enyaq received a notable facelift for the 2024 model year, and while the underlying MEB platform is shared, cooling and thermal management components may have changed at that point. You should not assume a pre-facelift cooling part will cross over to a post-facelift car without confirmation, as ancillary and mounting changes at a facelift are exactly the kind of detail you need to verify with the breaker against your specific registration. Give the breaker your full VIN and ask them to confirm compatibility rather than relying on the build year alone.

Does the trim level — for example Enyaq 60, 80, Sportline, or RS iV — affect which cooling components I need?

Trim level alone (such as Sportline or a cosmetic specification) does not affect fitment of mechanical and thermal components, but the underlying drivetrain variant absolutely does — a single-motor rear-wheel-drive 80 and a dual-motor four-wheel-drive RS iV have fundamentally different powertrain layouts and will not share all cooling system parts. Focus on the drivetrain designation (60, 80, 80x, RS iV) and supply your VIN to the breaker, rather than quoting trim names like Sportline which describe equipment and styling rather than mechanical configuration. The breaker will need your registration or VIN to pull the correct part for your specific motor and battery setup.