Findapart

Used Škoda Fabia Oil Cooler

Get quotes for a used or replacement Škoda Fabia oil cooler. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Fabia oil cooler

Used oil coolers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Fabia parts

Used oil cooler for other Škoda models

Fitment questions

Does the Škoda Fabia actually have an oil cooler?

Only certain Fabia variants were fitted with an oil cooler — generally the higher-output turbocharged petrol and diesel engines rather than the smaller naturally aspirated units, so it is not a universal Fabia part. Whether your specific car has one depends primarily on the engine code, which you can find on your V5C or via a VIN check. If you are unsure, share your registration and engine code with the breaker and they can confirm whether your engine was factory-fitted with an oil cooler.

Will an oil cooler from a Mk1 Fabia (1999–2007) fit my Mk2 Fabia (2007–2014)?

The Mk1 Fabia ran from 1999 to 2007 and the Mk2 from 2007 to 2014, and these are entirely different generations with different engine families, so an oil cooler from a Mk1 is very unlikely to be compatible with a Mk2. Fitment is driven by the engine code, not the generation badge, so the key question is whether both cars share the same engine code. Cross-generation compatibility is possible if the engine code genuinely matches, but you should confirm this directly with the breaker against your registration before ordering.

I have a Mk3 Fabia (2014–2021) — will an oil cooler from an early 2015 car fit a facelifted 2018 model?

The Mk3 Fabia ran from 2014 with a facelift in 2018, and oil cooler compatibility within the generation is primarily determined by the engine code rather than the model year. If your 2015 and 2018 cars share the same engine code, there is a strong basis for compatibility, but ancillary or mounting changes can occur mid-production even within the same engine family. Confirm against both registrations with the breaker to be sure, as subtle changes around the 2018 facelift point may affect direct fitment.

Does it matter whether my Fabia is a petrol or diesel when sourcing a used oil cooler?

Yes, fuel type matters significantly — diesel engines typically run higher thermal loads and oil cooling demands than equivalent petrol units, so the oil coolers are not interchangeable between fuel types even if the car looks identical. The engine code is the definitive guide here, as it encodes both the fuel type and the specific engineering of the lubrication system. Always give the breaker your full engine code rather than just stating petrol or diesel, as there are multiple petrol and diesel engine variants across Fabia generations.

Does the trim level — for example Fabia SE, Monte Carlo, or vRS — affect which oil cooler I need?

Trim level does not affect oil cooler fitment — what matters is the engine code, not whether the car is badged SE, Monte Carlo, vRS, or any other trim. A vRS or Monte Carlo may share an engine code with a standard trim car of the same era, in which case the oil cooler would be identical. The only caveat is that higher-performance trims sometimes used higher-output engine variants with different codes, so always verify the engine code on your V5C rather than assuming from the badge alone.

My Fabia has a 1.4 TDI engine — does it have an oil cooler and will one from another VAG group car fit?

The 1.4 TDI engine fitted to some Fabia models was shared across the VAG group, and oil coolers from VAG group vehicles carrying the same engine code can sometimes be compatible. However, ancillary connections, mounting brackets, and pipework can vary between different VAG models even with a matching engine code. Confirm the engine code and the donor vehicle's registration with the breaker before purchasing, as they will be best placed to advise on direct fitment compatibility.