Compare prices on a used Škoda Yeti subframe from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used subframe that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Also known as: sub frame.
The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift introduced in 2013 that brought styling changes but kept the same basic platform. For a subframe spanning that 2009–2013 to 2013–2017 boundary, the platform continuity is encouraging, but whether a pre-facelift subframe crosses cleanly to a post-facelift car is something you should confirm with the breaker against your exact registration, as mounting points and geometry can shift at a facelift even on a shared platform. Never assume fitment without checking.
Yes, engine size can matter for subframe compatibility on the Yeti, because larger or heavier engines sometimes require a more substantial front subframe to handle the additional load and different mounting positions. The Yeti was offered with a range of petrol and diesel engines including 1.2, 1.4, 1.6, 1.8, and 2.0-litre units, and the heavier 2.0 TDI or 4x4 variants in particular may use a different subframe to the smaller-engined two-wheel-drive cars. Always give the breaker your full registration so they can match the correct unit to your exact engine and drivetrain.
Yes, this matters significantly – a Yeti with four-wheel drive has different rear subframe and front subframe requirements compared to a front-wheel-drive model, because the 4x4 system adds additional mounting points and load paths that a FWD subframe simply won't have. Always tell the breaker whether your car is 4x4 or FWD, and confirm this against your registration rather than relying on the badge alone, as some models were available in both configurations.
Trim level – whether your Yeti is an S, SE, Elegance, or Outdoor – does not affect which subframe you need, as the subframe is determined by the platform, engine, and drivetrain rather than the equipment level. You may find cosmetic or equipment differences between donor cars (different underbody protection on Outdoor models, for example), but the structural subframe itself is not trim-specific. Focus your search on matching the engine size, drivetrain, and model year rather than the trim name.
This question crosses the 2013 facelift boundary, which is the key dividing point within the single Yeti generation (2009–2017). The underlying platform remained the same throughout, which is encouraging for compatibility, but whether a 2012 pre-facelift subframe fits a 2015 post-facelift car without modification is not something that can be stated as fact here – confirm this directly with the breaker against both registrations before buying. A good breaker will be able to cross-reference the part numbers to give you a definitive answer.
Yes, the front and rear subframes are completely different components with different functions, so it is essential to specify which one you need when contacting a breaker. The front subframe supports the engine, gearbox mounts, and front suspension, while the rear subframe (where fitted) supports the rear suspension and, on 4x4 models, the rear differential. Be precise about which unit you need, and give the breaker your registration, engine size, and whether your car is front-wheel drive or four-wheel drive to ensure you get the right part.