Compare prices on a used Škoda Yeti coil spring from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two coil springs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Škoda Yeti was sold as a single generation from 2009 to 2017, with a facelift arriving in 2013 that brought styling changes but no fundamental platform shift. Coil springs from pre-facelift (2009–2013) and post-facelift (2013–2017) Yetis may share dimensions, but whether they interchange reliably across that 2013 boundary is something you should confirm with the breaker against your exact registration, as suspension tuning can vary between model years. Never assume fitment without checking.
Yes, the Škoda Yeti uses coil springs as part of its suspension setup — MacPherson struts with coil springs at the front and a multi-link rear suspension with coil springs at the rear on most variants. Both 2WD and 4WD (4x4) versions of the Yeti were fitted with coil springs, so this is a genuine part for this model regardless of drivetrain. Make sure you specify front or rear, and whether your car is 2WD or 4WD, when requesting a quote from a breaker.
Engine size can influence suspension specification on the Yeti, as heavier or more powerful variants may have been fitted with springs rated differently to lighter engine versions. Whether the spring from a 1.2 TSI suits a 2.0 TDI, for example, is not something that can be confirmed here — check with the breaker against your registration plate to make sure you get the correct rate for your specific engine. Quoting your full registration is the safest approach.
Trim level alone does not determine which coil spring your Yeti needs — the S, SE, Elegance, and other UK trim grades all used the same basic suspension architecture. What matters more is your engine, whether you have 2WD or 4WD, and whether any sport or lowered suspension was fitted, so mention those details to the breaker rather than focusing on trim name. Be aware that if your car has a non-standard suspension setup, the breaker will need to know this, as spring rates can vary even within the same trim.
Yes, you should always tell the breaker which drivetrain your Yeti has, as the 2WD and 4WD versions can differ in rear suspension weight and configuration, which may affect spring specification. The 4WD Yeti carries additional drivetrain components that add weight, and the suspension may be set up accordingly. Quoting your registration is the most reliable way to ensure the breaker sources a spring from the correct donor vehicle.
Your 2012 Yeti sits in the pre-facelift period of the generation (2009–2013), while a 2014 or 2015 car is post-facelift (2013–2017), and both sit within the same overall platform. Springs from either side of the 2013 facelift may well be compatible, but crossing that boundary is exactly the kind of question to put to the breaker with both registrations to hand, as subtle specification changes are possible. Do not assume fitment without that confirmation.