Findapart

Used Škoda Enyaq Coil Spring

Compare prices on a used Škoda Enyaq coil spring from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Enyaq coil spring

A used coil spring that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Enyaq parts

Used coil spring for other Škoda models

Fitment questions

Do Škoda Enyaq coil springs actually exist, or does it have a different suspension setup?

The Škoda Enyaq is built on the Volkswagen MEB electric platform and uses a multi-link rear suspension and MacPherson strut front suspension — both of which do use coil springs, so coil springs are a genuine part on this model. However, because the Enyaq is a pure electric vehicle, there are no engine-size variants in the traditional sense; instead, weight differences between single-motor and dual-motor (iV 80x/RS) versions may mean the springs are rated differently. Always confirm the exact spring with the breaker against your registration to be sure you get the correct rate for your drivetrain.

Will a coil spring from an early Enyaq (2021-2022) fit a later Enyaq after the 2024 facelift?

The Enyaq launched in the UK in 2021 and received a facelift in 2024, which brought updates including revised front-end styling and some chassis refinements. The generation boundary is real and it is not safe to assume springs cross it freely — confirm with your breaker whether the pre-facelift and post-facelift springs share the same part number for your specific axle and variant before purchasing.

Does the trim level affect which coil spring I need — for example, does an Enyaq 60 need a different spring to an Enyaq 80 or RS?

Trim names like Enyaq 60, 80, and RS reflect different battery and motor configurations, and because the dual-motor RS and iV 80x are heavier and more powerful, they may carry differently rated springs compared to the single-motor 60 or 80. Trim names alone do not tell the full story here — the key factor is which drivetrain (single or dual motor, front or rear wheel drive) your car has, not cosmetic trim levels. Confirm the exact variant with your breaker against your registration to avoid getting a spring with the wrong rate.

Do I need to tell the breaker which side (left or right) the coil spring is from?

Front coil springs on the Enyaq sit around the MacPherson strut and are typically side-specific, so yes — always tell the breaker whether you need the nearside (NS, left-hand side as you sit in the car) or offside (OS, right-hand side). Rear coil springs on the multi-link setup are also handed on many MEB-platform vehicles. Getting the side wrong is an easy mistake, so double-check before ordering.

Could my Enyaq have air suspension instead of coil springs?

The standard Enyaq uses conventional coil spring suspension rather than air suspension — air suspension was not a widely listed factory option for the UK Enyaq in the way it is on some rivals. However, if you are unsure what your specific car has, check underneath or confirm with the breaker against your registration, as optional or market-specific builds can sometimes differ from the standard setup.

I've seen mentions of sport or DCC adaptive suspension on the Enyaq — does that change which coil spring I need?

Some Enyaq variants were available with DCC (Dynamic Chassis Control) adaptive dampers, and sport suspension tuning differences are possible across the range; these variations could affect spring rates and fitment. Whether your specific car has a sport or DCC setup, and how that changes the spring required, is something you should confirm directly with the breaker against your registration rather than assuming a standard spring will fit.