Get quotes for a used or replacement Škoda Karoq coil spring. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two coil springs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Yes, the Karoq uses coil springs on both its front and rear suspension across its model range, so this is a genuine part for the car. The front axle uses a MacPherson strut arrangement with a coil spring over the damper, and the rear axle also uses coil springs as part of its independent multi-link setup. You'll need to specify front or rear, plus your exact engine and drivetrain, when asking a breaker for a quote.
The Škoda Karoq first generation ran from 2017 through to the present, with a facelift arriving for the 2022 model year, so a 2018 car and a 2022 car sit either side of that facelift boundary. Body dimensions and suspension geometry remained closely related across that refresh, but whether a spring from a pre-facelift car crosses that boundary safely is something you should confirm with the breaker against your specific registration rather than assume.
Engine choice can influence suspension tuning and spring rates on the Karoq because heavier or more powerful variants may be set up differently from lighter ones, so a spring from a 1.0 TSI car may not be identical to one from a 2.0 TDI or a 2.0 TSI 4x4. The basic spring dimensions and fitment points tend to follow the axle layout rather than the engine, but whether the rate and length match your car is something to confirm with the breaker against your registration and engine code.
Trim level alone — whether your car is an SE, SE L, Sportline or Scout — does not fundamentally change the suspension mounting points or spring seat design on the Karoq, so trim is not a key fitment filter in the way generation and drivetrain are. That said, the Sportline trim was associated with sport suspension settings on some cars, and whether that affects spring rate or ride height compared with a standard SE car is something you should raise with the breaker rather than take as a given.
For Karoq front coil springs it is worth specifying NS or OS, as some vehicles have handed springs that differ left to right even if they look similar; rear springs on the Karoq are generally symmetrical and side may matter less, but it's always worth mentioning. Give the breaker your registration, engine code and the corner of the car you're replacing to make sure you get the right part first time.
The 4WD Karoq variants, including the Scout, carry extra drivetrain components at the rear which can affect how the rear suspension is loaded and potentially how it is tuned, so you should not assume a spring from a 2WD car is directly interchangeable with one from a 4WD car. Confirm with the breaker that the donor car matches your drivetrain layout as well as your generation, and always verify against your registration plate.