Get quotes for a used or replacement Škoda Citigo coil spring. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used coil springs vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Yes, the Škoda Citigo uses coil springs as part of its suspension setup — MacPherson struts with coil springs at the front and a torsion beam with coil springs at the rear. This applies across the range regardless of engine size or trim level, so coil springs are a genuine part to search for on this model.
The Škoda Citigo was one generation throughout its UK production run, with a facelift arriving around 2017, but the fundamental suspension architecture did not change between pre-facelift and post-facelift cars. Springs from earlier cars are likely to be physically compatible with later ones, but because spring rates and ride-height specifications can vary in ways that aren't obvious from the outside, you should confirm the exact part against your registration with the breaker before buying.
Yes, front and rear springs are different parts and are not interchangeable, so always tell the breaker which axle you need. Front springs on the Citigo sit within MacPherson strut assemblies and are side-specific in terms of how they're handed, so when ordering a front spring it's worth specifying nearside (NS, driver's left) or offside (OS, driver's right) to make sure you get the correct one.
Trim level alone does not affect coil spring fitment on the Citigo — S, SE, and Elegance are primarily differences in equipment and interior specification rather than suspension hardware. However, if your car was supplied with any kind of sport or lowered suspension option, the spring rate or ride height may differ, so confirm this possibility with the breaker against your registration to be safe.
The Citigo was offered with small-displacement petrol engines across its range, and for most standard suspension applications the difference between variants is unlikely to affect spring fitment significantly. That said, spring rates can theoretically be tuned to vehicle weight and specification even within the same model, so it's always worth confirming with the breaker that the donor car's engine and specification match yours as closely as possible.
The Škoda Citigo, SEAT Mii, and Volkswagen up! are all built on the same platform and share a great deal of running gear, so cross-brand compatibility is a reasonable avenue to explore if Citigo-specific springs are scarce. However, because spring specifications can vary between brands and markets even on shared platforms, you should always cross-reference the part numbers and confirm fitment with the breaker against your specific registration before purchasing.